The Omron/Sentech STC-SBS312POE features 33.3 FPS, and a dazzling 3.2 MP resolution.
Features:
Applications:
Model No |
STC-SBS312POE |
Imager |
1/1.8” 3.2M monochrome progressive CMOS (Sony: IMX265) |
Shutter Type |
Global Shutter |
Active Picture Element |
2048 (H) x 1536 (V) |
Cell Size |
3.45 (H) x 3.45 (V) µm |
Scanning System |
Full scanning, Variable ROI |
Scanning Mode |
Full Scanning (Full resolution) / ROI |
Frame Rate |
8bit:33.3 fps、10bit:16.6fps、10bitPacked:22.2fps、 12bit:16.6fps、12bitPacked:22.2fps; Maximum frame rate is 2083fps@264 x 4(8bit) |
ADC bit depth |
12 bit |
Video Output Format |
Mono 8, Mono 10, Mono 10 Packed, Mono 12, Mono 12 Packed |
Noise Level |
- |
- @ 8 Bit Output |
≤ 3 Digit (Gain 0 dB) |
- @ 10 Bit Output |
≤ 12 Digit (Gain 0 dB) |
- @ 12 Bit Output |
<= 48 Digit (Gain 0 dB) |
Sensitivity |
300 Lux |
ALC |
Auto shutter / Auto gain (AGC) / OFF (Default: Auto shutter OFF, AGC OFF) |
Electronic Shutter |
28 useconds to 16,777,215 useconds (8bit) \ 32 useconds to 16,777,215 useconds (10bit,12bit) |
Gain |
- |
- Analog |
0 to 20.8 dB (Default: 0dB) |
- Digital |
0 to 6 dB (Default: 0dB |
ROI |
Horizontal: 264 to 2048 pixels / Vertical: 4 to 1536 pixels (Default: 2048 x 1536); Adjustable steps for the image size: 8 pixels in horizontal direction and 2 lines in vertical direction; Adjustable steps for the offset: 8 pixels in horizontal direction and 2 lines in vertical direction |
Gamma |
Gamma 1.0 or uploadable gamma table (Default:1.0) |
Binning Function |
Not supported |
Decimation Function |
Individual x2 Horizontal, Vertical Decimation |
Mirror Image |
Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
Pixel Blemish Correction |
Up to 64 points |
White Balance |
Auto / Manual / Push to Set (Default: Manual) |
Operational Mode |
Edge preset trigger / Pulse width trigger(more than 13.3333uS(8bit), 17.77778uS(10bit,12bit)) |
Communication |
UART Communication through Ethernet port |
Interface |
IEEE802.3af CLASS2 (1000BASE-T) |
Protocol |
GigE Vision® 1.2 and GenICam™ Standard Version 2.1 (SFNC 1.4) |
I/O |
One opt-isolated input and two open collector outputs |
Power |
- |
- Input Voltage |
+ 10.8 ~ 26.4 Vdc |
- Consumption (Max / Default) |
+12V: 2.9 W, 24V:3.3 PoE: 3.5 W |
Dimensions |
35 (W) x 35 (H) x 53.4 (D) mm * |
Optical Filter |
No Filter |
Optical Center Accuracy |
Positional accuracy in Horizontal and Vertical directions:: ±0.3 mm Rotational accuracy of Horizontal and Vertical: ±2.0 deg. |
Material |
Aluminum Alloy(AC) |
Lens Mount |
C Mount |
Connections |
RJ45 connector Power- I/O connector: HR10A-7R-6PB (Hirose) or equivalent |
Camera Mount Screws |
Two 1/4'' Tripod screw holes (one on each top and bottom plate) ; Sixteen M4 screw holes (Four on each top, bottom and both side plate) |
Weight |
Approx. 100g |
Operational Temperature |
- |
- Minimum |
Environmental Temperature: 0 deg. ºC |
- Maximum |
Camera housing temperature (top plate) shall not exceed 60⁰C (This corresponds to an environmental temperature of approximately 43⁰C) |
Storage Temperature |
Environmental Temperature: -20°C to 65°C |
Storage Humidity |
Less than 85% |
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
Shock |
Acceleration 38G, half amplitude 6 ms, 3 directions 3 times each |
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 |
RoHS |
RoHS Compliant |