Omron/Sentech is releasing a brand new GigE Vision, 2.3 MP color GigE Vision camera. The STC-SCS231POE features 41.6 FPS, and a dazzling 2.3 MP resolution. Utilizing CMOS Global Shutter, the STC-SCS231POE is capable of capturing moving objects without any motion blur. By utilizing the GigE Vision interface, speed and power have never been easier to use.
Features:
Applications:
Image Sensor | 1/1.2" 2.35 MP Color Progressive CMOS (SONY: IMX174) |
Active Picture Element | 1920 (H) x 1200 (V) |
Chip Size | 5.59 (H) x 4.68 (V) mm |
Scanning System | Progressive |
Scanning Mode | Full Scanning (Full resolution) / ROI |
Frame Rate | 8bit,10bit : 41.6 fps (full resolution), Maximum frame rate 1322@16 x 2 12bit : 32.4 fps (full resolution), Maximum frame rate 1030@16 x 2 |
ADC bit depth | 12bit, 10bit |
Video Output Format | BGR8bit, RAW8bit/10bit/12bit, BayerRG10Packed/12Packed |
Noise Level | - |
- @ 8 Bit Output | ≤ 1.5 Digit (Gain 0 dB) |
- @ 10 Bit Output | ≤ 6 Digit (Gain 0 dB) |
- @ 12 Bit Output | ≤ 24 Digit (Gain 0 dB) |
Sensitivity | 1120 Lux |
ALC | Auto shutter / Auto gain (AGC) / Manual (Default: Auto shutter OFF, AGC OFF) |
Electronic Shutter | 2bit: Edge preset trigger, Free run: 34 useconds to 16,777,215 useconds; Pulse width trigger: 25 useconds to 16,777,215 useconds; 8bit,10bit: Edge preset trigger, Free run: 39 useconds to 16,777,215 useconds; Pulse width trigger: 20 useconds to 16,777,215 useconds; |
Gain | - |
- Analog | 0 to 24 dB (Default: 0dB) |
- Digital | 0 to 6 dB (Default: 0dB) |
ROI | Horizontal: 16 to 1920 pixels / Vertical: 2 to 1200 pixels (Default: 1920 x 1200), Adjustable steps for the image size: 8 pixels in horizontal direction and 2 lines in vertical direction, Adjustable steps for the offset: 8 pixels in horizontal direction and 2 lines in vertical direction |
Gamma | Gamma 1.0 (Factory default) or uploadable gamma table |
Binning Function | Not supported |
Decimation Function | Individual x2 Horizontal, Vertical Decimation |
Mirror Image | Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
ROI Function | Variable ROI setting via the communication |
White Balance | Auto / Manual / Push to Set (Default: Manual) |
Operational Mode | Free-run / Edge-Preset Trigger / Pulse Width Trigger (Default: Free-run) |
Interface | IEEE802.3af CLASS2 (1000BASE-T) |
Protocol | GigE Vision® 1.2 and GenICam™ Standard Version 2.1 (SFNC 1.4) |
I/O | One opt-isolated input and two open collector outputs |
Communication | UART Communication through Ethernet port |
Power | - |
- Input Voltage | + 10.8 ~ 26.4 Vdc |
- Consumption | - Consumption (Max/Default) |
Dimensions | 35 (W) x 35 (H) x 53.4 (D) mm * |
Optical Filter | - |
Optical Center Accuracy | Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
Material | Aluminum Alloy (AC) |
Lens Mount | C-Mount |
Connectors | RJ45 connector Power- I/O connector: HR10A-7R-6PB (Hirose) or equivalent |
Camera Mount Screws | Two 1/2'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate) |
Weight | Approx. 100g |
Operating Temperature | - |
- Minimum | Environmental Temperature: -0°C |
- Maximum | Camera housing temperature (top plate) shall not exceed 60⁰C (This corresponds to an environmental temperature of approximately 40⁰C) |
Storage Temperature | Environmental Temperature: -20°C to 65°C |
Storage Humidity | < 85% |
Vibration | 20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each |
Shock | Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each |
Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
RoHS | RoHS Compliant |