These Sentech cameras are perfect for applications requiring high quality with it's IMX265 3.2MP global shutter sensor with 35fps.
Features:
Image Sensor | 1/1.8” 3.2M color progressive CMOS (Sony: IMX265) |
Shutter Type | Global |
Active Picture Element | 2048 (H) x 1536 (V) |
Cell Size | 3.45 (H) x 3.45 (V) µm |
Scanning System | Progressive |
Scanning Mode | Full Scanning (Full resolution) / ROI |
Frame Rate | 8bit:33.3 fps、10bit:16.6fps、10bitPacked:22.2fps、 12bit:16.6fps、12bitPacked:22.2fps; Maximum frame rate is 2083fps@264 x 4(8bit) |
ADC bit depth | 12 bit |
Video Output Format | BayerBG8, BayerBG10, BayerBG10Packed, BayerBG12, BayerBG12Packed |
Nosie Level | - |
-@8Bit Output | ≤ 3 Digit (Gain 0 dB) |
-@10Bit Output | ≤ 12 Digit (Gain 0 dB) |
-@12Bit Output | <= 48 Digit (Gain 0 dB) |
Sensitivity | 780 Lux |
ALC | Auto shutter / Auto gain (AGC) / OFF (Default: Auto shutter OFF, AGC OFF) |
Electronic Shutter | 30 useconds to 16,777,215 useconds (8bit) 35 useconds to 16,777,215 useconds (10bit,12bit) |
Gain | - |
-Analog (Gain) | 0 to 20.8 dB (Default: 0dB) |
-Digital (Gain) | 0 to 6 dB (Default: 0dB) |
ROI (AOI) | Horizontal: 264 to 2048 pixels / Vertical: 4 to 1536 pixels (Default: 2048 x 1536); Adjustable steps for the image size: 8 pixels in horizontal direction and 2 lines in vertical direction; Adjustable steps for the offset: 8 pixels in horizontal direction and 2 lines in vertical direction |
Gamma | Gamma 1.0 or uploadable gamma table (Default:1.0) |
Binning | Not Supported |
Decimation | Individual x2 Horizontal, Vertical Decimation |
Mirror Image | Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
Pixel Blemish Correction | Up to 64 points |
White Balance | Auto / Manual / Push to Set (Default: Manual) |
Operational Mode | Edge preset trigger / Pulse width trigger(more than 13.3333uS(8bit), 17.77778uS(10bit,12bit)) |
Communication | UART Communication through Ethernet port |
Interface | IEEE802.3af CLASS2 (1000BASE-T) |
Protocol | GigE Vision® 1.2 and GenICam™ Standard Version 2.1 (SFNC 1.4) |
I/O | One opt-isolated input and two open collector outputs |
Power | - |
- Input Voltage | + 10.8 ~ 26.4 Vdc |
- Consumption (Max / Default) | +12V: 2.9 W, 24V:3.3 PoE: 3.5 W |
Dimensions | 35 (W) x 35 (H) x 53.4 (D) mm * |
Optical Filter | No Filter |
Optical Center Accuracy | Positional accuracy in Horizontal and Vertical directions:: ±0.3 mm Rotational accuracy of Horizontal and Vertical: ±2.0 deg. |
Material | Aluminum Alloy (AC) |
Lens Mount | C-Mount |
Connections | RJ45 connector Power- I/O connector: HR10A-7R-6PB (Hirose) or equivalent |
Camera Mount Screws | Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate) |
Weight | Approx. 100g |
Operating Temperature | - |
- Minimum | Environmental Temperature: 0 deg. C° |
- Maximum | Camera housing temperature (top plate) shall not exceed 60⁰C (This corresponds to an environmental temperature of approximately 43⁰C) |
Storage Temperature | Environmental Temperature: -20°C to 65°C |
Storage Humidity | Less than 85% |
Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
Shock | Acceleration 38G, half amplitude 6 ms, 3 directions 3 times each |
Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
RoHS | RoHS Compliant |