The Omron/Sentech STC-MCA5MUSB3 USB 3.0 color camera features a 1/2.5" CMOS Aptina sensor with a scalable 5MP (14fps) to 32 x 32 pixels (2,106fps) resolution.
Image Sensor | 1/2.5” 5Mpixel CMOS; (Aptina: MT9P031/12STM) |
Active Picture Element | 2592 (H) x 1944 (V) |
Cell Size | 2.2 (H) x 2.2 (V) µm |
Scanning System | Progressive |
Shutter Type | Rolling Shutter |
Scanning Methods | Full Scanning. Variable AOI (Horizontal/Vertical) |
Maximum Frame Rate | |
14 fps @
|
QSXGA (2592 x 1944) |
21 fps @
|
QXGA (2048 x 1536) |
31 fps @
|
UXGA (1600 x 1200) |
42 fps @
|
SXGA (1280 x 1024) |
63 fps @
|
XGA (1024 x 768) |
90 fps @
|
SVGA (800 x 600) |
123 fps @
|
VGA (540 x 480) |
Sync System | Internal |
Video Output | B GR-8bit; RAW 8bit/10bit/12bit.; Mono8bit/10bit/12bit |
S/N Ratio | ≤ 4 Digit (Gain 0 dB) |
Minimum Scene Illumination | 9.0 Lux @ F1.2 |
ALC | Auto Shutter /Auto Gain |
Electronic Shutter | Free-run Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Edge Preset Trigger Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Pulse-width Trigger Mode: Exposure Time -- 32 µsec to unlimited (in full scanning mode) |
Gain | |
Analog
|
0 to 26.97 dB |
Digital
|
0 to 12.04 dB |
Digital Clamp | 0 to 255 (LSB of 12bit output) |
Gamma | 0.1 to 4.0 (settable with 0.1 step) |
AOI Function | AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines); Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction |
Binning | Horizontal 1/2, 1/4 Vertical 1/2, 1/4 *Only pixels in the horizontal direction can be added to increase the brightness. |
Skipping | Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8 |
Mirror Image | Horizontal / Vertical / Horizontal and Vertical |
Pixel Blemish Correction | Up to 64 pixels (This function is turned off at shipping.) |
White Balance | Auto / Manual / One shot |
Operation Mode | Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger |
Frame Memory | 1 frame (2592 x 1944) |
Input / Output | USB 3.0 Super Speed (USB 3.0 Micro B) |
Power | |
Input Voltage
|
+5V (typ.) (Conform to USB Standard) |
Consumption
|
Less than 2.0 W |
Dimensions | 28 (W) x 28 (H) x 33.8 (D) mm (excluding connector) |
Lens Mount | CS Mount |
Optical Filter | IR Cut Filter |
Optical Center Accuracy | Positional accuracy in H and V directions: +/- 0.5 mm Rotational accuracy of H and V: +/- 0.35 deg. |
Weight | Approximately 38 g |
Interface Connector | USB: USB3 Micro-B USB connector; IO signal: 6pin connector (HR10A-7R-6PB or equivalent) (2 inputs/ 2 outputs) |
Operating Temperature | 0 to 40 deg. C |
Storage Temperature | -30 to 65 deg. C |
Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each |
Shock | Acceleration 38G, half amplitude 6ms, 3 directions 3 times each |
Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
RoHS | RoHS compliant |