Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Omron STC-MBCM401U3V-NIR (STCMBCM401U3VNIR) 4MP USB3, Monochrome Camera

Omron STC-MBCM401U3V-NIR (STCMBCM401U3VNIR) 4MP USB3, Monochrome Camera

Omron STC-MCA5MUSB3 5MP USB3, Color Camera

Omron STC-MCA5MUSB3 5MP USB3, Color Camera

Omron STC-MBA5MUSB3 5MP USB3, Monochrome Camera

The Omron/Sentech STC-MBA5MUSB3, a member of the brand new USB 3.0 camera series. The monochrome CMOS USB 3.0 camera is available in a 1/2.5" CMOS sensor with a 5MP to VGA scalable resolution and 14 to 123 FPS.
SKU
STC-MBA5MUSB3

Omron/Sentech is proud to present the STC-MBA5MUSB3, a member of the brand new USB 3.0 camera series. The monochrome CMOS USB 3.0 camera is available in a 1/2.5" CMOS sensor with a 5MP to VGA scalable resolution and 14 to 123 FPS. This low cost, high performance camera is compatible with all standard industry drivers, and comes with the Sentech Viewing Software and SDK.

Features:

  • 1/2.5" CMOS Sensor
  • 5 Megapixel to VGA Scalable Resolution
  • Low Cost
Image Sensor 1/2.5” 5Mpixel CMOS; (Aptina: MT9P031/12STM)
Active Picture Element 2592 (H) x 1944 (V)
Cell Size 2.2 (H) x 2.2 (V) µm
Scanning System Progressive
Shutter Type Rolling Shutter
Scanning Methods Full Scanning. Variable AOI (Horizontal/Vertical)
Maximum Frame Rate
14 fps @
QSXGA (2592 x 1944)
21 fps @
QXGA (2048 x 1536)
31 fps @
UXGA (1600 x 1200)
42 fps @
SXGA (1280 x 1024)
63 fps @
XGA (1024 x 768)
90 fps @
SVGA (800 x 600)
123 fps @
VGA (540 x 480)
Sync System Internal
Video Output RAW 8bit/10bit/12bit
S/N Ratio ≤ 4 Digit (Gain 0 dB)
Minimum Scene Illumination 0.3 Lux @ F1.2
ALC Auto Shutter /Auto Gain
Electronic Shutter Free-run Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Edge Preset Trigger Mode: Exposure Time -- 32 µsec to 38sec (in full scanning mode) Pulse-width Trigger Mode: Exposure Time -- 32 µsec to unlimited (in full scanning mode)
Gain
Analog
0 to 26.97 dB
Digital
0 to 12.04 dB
Digital Clamp 0 to 255 (LSB of 12bit output)
Gamma 0.1 to 4.0 (settable with 0.1 step)
AOI Function AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines); Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction
Binning Horizontal 1/2, 1/4 Vertical 1/2, 1/4  *Only pixels in the horizontal direction can be added to increase the brightness.
Skipping Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8
Mirror Image Horizontal / Vertical / Horizontal and Vertical
Pixel Blemish Correction Up to 64 pixels (This function is turned off at shipping.)
White Balance N/A
Operation Mode Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger
Frame Memory 1 frame (2592 x 1944)
Input / Output USB 3.0 Super Speed (USB 3.0 Micro B)
Power
Input Voltage
+5V (typ.) (Conform to USB Standard)
Consumption
Less than 2.0 W
Dimensions 28 (W) x 28 (H) x 33.8 (D) mm (excluding connector)
Lens Mount CS Mount
Optical Filter No IR Cut Filter
Optical Center Accuracy Positional accuracy in H and V directions: +/- 0.5 mm Rotational accuracy of H and V: +/- 0.35 deg.
Weight Approximately 38 g
Interface Connector USB: USB3 Micro-B USB connector; IO signal: 6pin connector (HR10A-7R-6PB or equivalent) (2 inputs/ 2 outputs)
Operating Temperature 0 to 40 deg. C
Storage Temperature -30 to 65 deg. C
Vibration 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
Standard Compliancy EMS: EN61000-6-2, EMI: EN55011
RoHS RoHS compliant