Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-MBS500U3V (STCMBS500U3V) STC-MBS500U3V-SE 5MP USB3, Monochrome Camera
Sentech has released another member of the USB3 Vision camera family. The mono STC-MBS500U3V features the Sony IMX264 5MP global shutter sensor with 35fps.
STC-MBS500U3V-SE Model Also Available
$1,050.00
Please call for pricing
SKU
STC-MBS500U3V
Sentech has released another member of the USB3 Vision camera family. The mono STC-MBS500U3V features the IMX264 5MP global shutter sensor with 35fps.
Features:
- USB3 Vision Compliant
- 75.7 fps
- 2/3” 5.1M Progressive B/W CMOS
- Sony: IMX250LLR-C
| Image Sensor | 2/3” 5.1M Progressive Monochrome CMOS (Sony: IMX264) |
| Shutter Type | Global |
| Active Picture Element | 2448 (H) x 2048 (V) |
| Cell Size | 3.45 (H) x 3.45 (V) µm |
| Sync System | Free run, External trigger (Hardware, Software) |
| Maximum Frame Rate (Full Scan) | - |
| -8Bit Output | 35.8 fps |
| -10Bit Output | 35.8 fps |
| -10bit Packed output | 35.8 fps |
| -12Bit Output | 35.8 fps |
| -12bit Packed output | 35.8 fps |
| ADC bit width | 10bit / 12bit |
| Video Format | 8/10/12 bit output (Support packed on 10bit, 12bit) |
| Noise Level | - |
| -8Bit Output | ≤ 3 LSBs (Gain 0 dB) |
| -10bit / 10bit Packed Output | ≤ 12 LSBs (Gain 0 dB) |
| -12bit / 12bit Packed Output | ≤ 48 LSBs (gain 0 dB) |
| Sensitivity | 380 Lux |
| Exposure Time | - |
| -8Bit Output | 27.2μseconds to 56 seconds |
| -10Bit Output | 27.2μseconds to 56 seconds |
| -10bit Packed output | 27.2μseconds to 56 seconds |
| -12Bit Output | 27.2μseconds to 56 seconds |
| -12bit Packed output | 27.2μseconds to 56 seconds |
| Gain | - |
| -Analog (Gain) | 0 to 20.8 dB |
| -Digital (Gain) | 0 to 6 dB |
| Black Level | - |
| -8Bit Output | 0 to 31 |
| -10bit / 10bit Packed Output | 0 to 127 |
| -12bit / 12bit Packed Output | 0 to 511 |
| White Balance | N/A |
| ROI (AOI) | Horizontal: 64 to 2448 (2432 on Packed) / Vertical: 32 to 2048 Adjustable Steps for offset: 16 pixels in horizontal direction (64 pixels on Packed) / 4 lines in vertical direction Adjustable Steps for offset: 4 pixels in horizontal direction / 4 lines in vertical direction |
| Gamma | Gamma Table =0.1 to 4.0, Default = 1.0 |
| Binning | Individual x2 Horizontal, Vertical Binning / OFF (Horizontal: Average, Vertical: Addition) *8 |
| Decimation | Individual x2 Horizontal, Vertical Decimation |
| Image Flip | Horizontal / Vertical / Horizontal and Vertical / OFF |
| Pixel Defect Correction | Up to 64 points |
| Auto Image Control | - |
| -Auto Exposure | Support (Default: Fix 27.5 mseconds) |
| -Auto Gain | Support (Default: Fix x1) |
| -Auto White Blance | N/A |
| Operational Mode | Free-run/ Edge-preset Trigger/ Pulse width Trigger/ Start Stop Trigger |
| User Setting Mode | Support |
| Communication | Via USB3.0 bus |
| Interface | USB3.0 Super speed (USB3.0 Micro B) |
| Protocol | USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant and Sentech’s unique protocol (on Normal SDK, Trigger SDK) |
| Input/Output | Three GPIO, One Camera Hardware Reset |
| Power | - |
| Input Voltage | +5V(typ.) (This conforms to the USB standard) |
| Consumption | Max: 3.4W, Typ: 2.8W |
Related Products
CEI Machine Vision USB3-1-2-2-02M 2 Meter USB 3.0 Cable
CEI Machine Vision USB3-1-2-2-03M 3 Meter USB 3.0 Cable
CEI Machine Vision USB3-1-2-2-05M 5 Meter USB 3.0 Cable
Omron TP-HCA Tripod Mount for USB 3.0 Cameras
Omron FJ-VSP2 3M Power Supply and I/O Cable
Omron FJ-VSP2 5M Power Supply and I/O Cable
Omron FJ-VSP2 10M Power Supply and I/O Cable