Omron STC-MB32A (STCMB32A) Progressive Scan Monochrome Cased Camera

Model No

STC-MB32A

Image Sensor

1/2" Progressive Monochrome CCD (Sony: ICX414AL)

Effective Picture Element

659 (H) x 494 (V)

Active Picture Element

VGA: 648 (H) x 494 (V)

Chip Size

7.48 (H) x 6.15 (V) mm

Cell Size

9.9 (H) x 9.9 (V) μm

Scanning System

Full scanning, Variable ROI

Scanning Method

-

- *1: un-support on 90fps

Full scanning, Partial full scanning, 1/2partial scanning,1/4 partial scanning, Variable partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanninG Binning variable partial scanning

Vertical Frequency (Frame Rate)

31.47 (30 fps) / 62.94 (60 fps) / 94.784 (90 fps) Hz

Horizontal Frequency

15.7343 (30 fps) / 31.4685 (60 fps) / 47.2028 (90 fps) kHz

Pixel Frequency

12.2727 (30 fps) / 24.5454 (60 fps) / 36.8181 (90 fps) MHz

Resolution

480 TV Lines

S/N Ratio

56 dB (GAIN 0dB)

Minimum Scene Illumination

0.1 Lux at F1.2

Sync System

Internal / External (Auto Select)

Video Output

1.0 Vp-p / 75 Ω, DC coupling

Shutter Speed

-

- Dip Switch

OFF, 1/100, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000 seconds (30fps) OFF, 1/200, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/20,000 seconds (60fps) OFF, 1/300, 1/750, 1/1,500, 1/3,000, 1/6,000, 1/12,000, 1/30,000 seconds (90fps)

- Communication

OFF, 1/3 ~ 1/40,000 seconds (Variable at every H and clock) (30 fps) OFF, 1/7 ~ 1/80,000 seconds (Variable at every H and clock) (60 fps) OFF, 1/11 ~ 1/120,000 seconds (Variable at every H and clock) (90 fps)

ALC

Support(AE,AGC), (Defalut: AE:OFF, AGC:OFF )

Gain

0 to 27 dB (Default: 0 dB)

Gamma

1 / 0.45 (Default: 1)

Operational Mode

Edge Preset Trigger (V-reset, Non-Reset) Pulse Width Trigger (V-reset, Non-Reset)

Pixel Defect Correction

Up to 64 pixels (Default: ON）

Field update Function

Support

Communication

RS232 via 12 Pin Connector

Power

-

- Input Voltage

DC12V +/- 10%

- Consumption

Less than 2.5 W

Dimensions

28 (W) x 28 (H) x 40 (D) mm (excluding the connector)

Lens Mount

C Mount

Optical Filter

No IR cut filter

Optical Center Accuracy

Positional Accuracy in H and V Directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 2.1 deg.

Material

-

- Case

Aluminum alloy

- Tripod

Polycarbonate ABS

Interface Connector

HR10A-10R-12PB (Hirose) or equivalent

Tripod

Tripod can be attached to 2 plates (4 screws on the bottom plate, 3 screws on the top plate)

Weight

Approximately 42 g

Operating Temperature

Environmental Temperature: 0 to +50 deg. C, Environmental Humidity: 0 to 85%

Storage Temperature

Environmental Temperature: -25 to +65 deg. C, Environmental Humidity: 0 to 90%

Vibration

20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each

Shock

Acceleration 70G, half amplitude 6 ms, XYZ 3 directions 3 times each

Standard Compliancy

EMS: EN61000-6-2, EMI: EN55011 (Class B)

RoHS

RoHS Compliant