Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-MBCM401U3V (STCMBCM401U3V) 4MP USB3, Monochrome Camera
The STC-MBCM401U3V combines high megapixel resolution with a fast frame rate in order to provide the best machine vision camera on the market.
Features:
- 2048(H) x 2048(V) 145fps
- 5.5μm x 5.5μm 1”
Applications:
- Security
- Industrial
- Inspection
- Traffic Cameras
- In Car Videos
Imaging
|
Model No |
STC-MCCM401U3V |
|
Image Sensor |
1" 4 MP Color CMOS (CMOSIS: CMV4000) |
|
Active Picture Element |
2048 (H) x 2048 (V) |
|
Cell Size |
5.5 (H) x 5.5 (V) μm |
Function
|
Scanning System |
Full scanning, Variable ROI |
|
Shutter Type |
Global Shutter |
|
Scanning Mode |
Full Scanning, Variable ROI (Horizontal and Vertical) |
|
Maximum Frame Rate (Full Scanning Mode) |
4M: 2048 x 2048: 89fps (Raw 8bit), 45fps(Raw10bit), 37fps(Raw12bit) *Frame rate will drop if connected with the USB 2.0 port |
|
Maximum Frame Rate (AOI Mode) |
1280 x 1024: 177fps, 640 x 480: 370fps, Minimum AOI (32 x 32): 3500 fps |
|
Sync System |
Internal |
|
Video Output Format |
RAW 8bit / 10bit / 12bit (Default Raw 8bit) |
|
S/N Ratio |
Less than 3 digit (Gain 0 dB) |
|
Minimum Scene Illumination |
TBD Lux @ F1.2 |
|
Electronic Shutter |
Preset Free-run Mode: Exposure Time 22 μsec to16 sec (in full scanning mode); Preset Trigger Mode: Exposure Time 22 μsec to 16 sec (in full scanning mode) |
|
Gain |
- |
|
- Analog (Gain) |
Not supported |
|
- Digital (Gain) |
0 ～ 13.9 dB (Default 0dB) |
|
Offset (Analog) |
0 to 255 digit (for 12bit/pix data) 8bit: 0 to 15digit |
|
ROI |
ROI (Horizontal：32 to 2048 pixels / Vertical：32 to 2048 lines); (Default: 2048 x 2048） Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction |
|
Binning Function |
N/A |
|
Decimation Function |
x2, x4 Vertical Decimation |
|
ALC |
AE, AGC (Default AE:OFF, AGC:OFF |
|
White Balance |
Auto, Manual, One Push (Default: Manual) |
|
HDR |
N/A |
|
Mirror Image |
Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
|
Pixel Defect Correction |
Up to 64 pixels (Default: ON） |
|
Operational Mode |
Free-run / Edge-Preset Trigger / Pulse Width Trigger |
|
User Setting Storage |
Supported |
|
Interface |
USB 3.0 Super Speed (USB 3.0 Micro B) |
|
Input / Output |
Three GPIO, One Camera Hardware Reset |
|
Power |
- |
|
- Input Voltage |
+5V (typ.) (Conform to USB Standard) |
|
- Communication |
Less than TBD W |
Mechanical
|
Dimensions |
C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors |
|
Lens Mount |
C Mount |
|
Optical Filter |
|
|
Optical Center Accuracy |
Positional Accuracy in H and V directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
|
Weight |
Approx. 52g |
|
Interface Connector |
USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent |
Environmental
|
Operating Temperature |
- |
|
- Minimum |
Environmental Temperature: -5°C |
|
- Maximum |
Camera housing temperature (top plate) shall not exceed 55°C |
|
Storage Temperature |
Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85% |
|
Vibration |
20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each |
|
Shock |
Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each |
|
Standard Compliancy |
TBD (EMS: EN61000-6-2, EMI: EN55011) |