Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-MB83A Progressive Scan EIA Monochrome Cased Camera (CMOS Sensor: Sony ICX204AL)
This series features an XGA sensor with a scan rate of 29 fps, analog output and variable integration shutter trigger.
Features:
Applications:
Imaging
|
Model No |
STC-MB83A |
|
Image Sensor |
1/3" Progressive Monochrome CCD (Sony: ICX204AL) |
|
Effective Picture Element |
1034 (H) x 779 (V) |
|
Active Picture Element |
XGA Class 1024 (H) x 768 (V) |
|
Chip Size |
5.8 (H) x 4.92 (V) mm |
|
Cell Size |
4.65 (H) x 4.65 (V) µm |
Function
|
Scanning System |
Full scanning, Variable ROI |
|
Scanning Method |
- |
|
- *1: un-support on 90fps |
Full scanning, Partial full scanning, 1/2partial scanning,1/4 partial scanning, Variable partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanninG Binning variable partial scanning |
|
Vertical Frequency (Frame Rate) |
29 Hz |
|
Horizontal Frequency |
23.23 kHz |
|
Pixel Frequency |
29.5 MHz |
|
Resolution |
770 TV Line |
|
S/N Ratio |
56 dB (GAIN 0dB) |
|
Minimum Scene Illumination |
0.12 Lux @ F1.2 |
|
Sync System |
Internal / External (Auto Select) |
|
Video Output |
1.0 Vp-p / 75 Ω, DC coupling |
|
Shutter Speed |
- |
|
- Dip Switch |
OFF, 1/200, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/20,000 second |
|
- Communication |
OFF, 1/7 ~ 1/80,000 seconds (Variable at every H and clock) |
|
ALC |
Support(AE,AGC), (Defalut: AE:OFF, AGC:OFF ) |
|
Gain |
0 to 27 dB (Default: 0 dB) |
|
Gamma |
1 / 0.45 (Default: 1) |
|
Operational Mode |
Edge Preset Trigger (V-reset, Non-Reset) Pulse Width Trigger (V-reset, Non-Reset) |
|
Pixel Defect Correction |
Up to 64 pixels (Default: ON） |
|
Field update Function |
Support |
|
Communication |
RS232 via 12 Pin Connector |
|
Power |
- |
|
- Input Voltage |
DC12V +/- 10% |
|
- Consumption |
Less than 1.8 W |
Mechanical
|
Dimensions |
28 (W) x 28 (H) x 40 (D) mm (excluding the connector) |
|
Lens Mount |
C Mount |
|
Optical Filter |
No IR cut filter |
|
Optical Center Accuracy |
Positional Accuracy in H and V Directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 2.1 deg. |
|
Material |
- |
|
- Case |
Aluminum alloy |
|
- Tripod |
Polycarbonate ABS |
|
Interface Connector |
HR10A-10R-12PB (Hirose) or equivalent |
|
Tripod |
Tripod can be attached to 2 plates (4 screws on the bottom plate, 3 screws on the top plate) |
|
Weight |
Approximately 42 g |
Environmental
|
Operating Temperature |
Environmental Temperature: 0 to +50 deg. C, Environmental Humidity: 0 to 85% |
|
Storage Temperature |
Environmental Temperature: -25 to +65 deg. C, Environmental Humidity: 0 to 90% |
|
Vibration |
20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each |
|
Shock |
Acceleration 70G, half amplitude 6 ms, XYZ 3 directions 3 times each |
|
Standard Compliancy |
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class A) |
|
RoHS |
RoHS Compliant |