Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Hitachi KP-FD30M Progressive Scan Color Camera
The KP-FD30M is a single CCD type RGB color camera which utilized the progressive scan CCD image sensor with square pixel for VGA format of 1/2-inch which adopted the RGB primary color mosaic filter. The KP-FD30M is equipped with the progressive full frame RGB output of high frame rate( approx. 60 frame/second ), the external synchronization(HD/VD), the external trigger function, etc., it is suitable for the image-processing equipment input.
Feature:
- Primary Color Filter
- 440 Lines of Resolution
- 50 db S/N
- 60 frames per second progressive output
- 10 lux minimum sensitivity
- Analog RGB Progressive output
- Analog RGB, Y/C and composite NTSC outputs
- Built-In Memory with Trigger
- Available with CameraLink output as KP-FD30CL
Applications:
- High Speed Image Processing
- Industrial
- Machine Vision
- Inspection
| Imaging Device | 1/2" Progressive Scan Interline CCD | |
| Total Number of Pixels | 692(H) x 504(V) | |
| No. of Effective Pixels | 659(H) × 494(V) | |
| Unit Cell Size | 9.9(H) x 9.9(V) m (Square Pixel) | |
| Scanning Area | 7.48(H) × 6.15(V) mm | |
| Color Filter | R, G, B primary color mosaic filters on chip | |
| Scanning System | Progressive Scan (VGA mode) | |
| Frequency | Horizontal: 31.468 kHz Vertical: 59.94 Hz |
|
| Sync. System | Internal / External (HD/VD Auto Selection) | |
| Internal Sync Output (D-sub 15pin MULTI connector) |
HD |
31.468 kHz 2 Vp-p/75O, Negative 59.94 Hz 2 Vp-p/75O Negative 2 Vp-p/75O, Negative 5 Vp-p, Negative |
| External Sync Input (D-sub 15pin MULTI connector) |
HD |
31.468 kHz 2 to 5 Vp-p, Negative 59.94 Hz 2 to 5 Vp-p, Negative Low 0 VDC, High 2 to 5 VDC |
| Video Signal Output (D-sub 15pin MULTI connector) |
R G B Sync on G |
0.7 Vp-p/75 |
| Video Signal Processing | More than 50dB (AGC, enhancer and gamma off) | |
| S/N (G signal) | More than 50dB (AGC, enhancer and gamma off) | |
| Resolution (G signal at center) | Horizontal : 440 TV lines Vertical : 480 TV lines |
|
| Standard Sensitivity | 2,000 lx (F5.6, 100IRE) | |
| Minimum Illumination | 10 lx (F1.4, AGC ON, 50IRE) | |
| Sensitivity Selection | AGC OFF / ON Manual Gain Adjustable at AGC OFF Limit Gain Adjustable at AGC ON |
|
| Electric Shutter Speed |
PRESET: Selectable in 11 steps high speed shutter |
|
| Ext. Trigger | a) One trigger mode b) Fixed shutter mode NORMAL(1/60), 1/250, 1/500, 1/1000, 1/2000, 1/4000 1/10000, 1/50000 second Memory mode: OFF/ON |
|
| Auto Level Control[ALC] (The auto level control system of AES, lens iris and AGC.) |
AVERAGE / PEAK&AVERAGE / AREA (Scanning area is selectable from 9 area.) |
|
| Auto-Iris Lens Outputs | Iris control voltage input (galvanometer) type lens : Coupling coil impedance Damper : 1,150O±10% Drive : 190O±10% |
|
| White Balance | Selectable in 3 modes Auto-tracking[ATW] / preset[AWC] / R/B gain manual control[MANUAL] / |
|
| Text Display | 24 alpha-numeric characters in one line | |
| Picture Adjustment | Modes and settings can be selected and adjusted from on-screen menu |
|
| Remote Control | Modes and settings can be selected and adjusted from PC. RS-232C level, Connector: D-sub 15pin MULTI connector |
|
| Power Supply | 12 VDC ± 10 % | |
| Power Consumption | Approx. 370 mA (Including 60mA for auto-iris lens) |
|
| Lens Mount | C/CS mount (Flange-back adjustment) | |
| Ambient Temperature | Operating : -10 to +50 ?, 30 to 80 %RH Storage : -20 to +60 ?, 20 to 90 %RH |
|
| Vibration Endurance | 68.65 m/s2 (10 to 200Hz, 30 minutes each on XYZ axes) | |
| Shock Endurance | 490.3 m/s2 (vertical, horizontal, once each face) | |
| External Dimensions | 58(W) x 58(H) x 48(D) | |
| Weight | Approx. 220g (without lens) | |