Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Hitachi KP-FD30 Progressive Scan Color Camera
659 × 494 Effective Pixels, 1/2" progressive scan interline CCD, C/CS mount.
SKU
KP-FD30-Hitachi
The KP-FD30 is equipped with the progressive full frame RGB output of high frame rate( approx. 60 frame per second ). Optionally The KP-FD30CL outputs Camera-Link. Both camera is equipped the external synchronization (HD/VD), the external trigger function, etc., it is suitable for the image-processing equipment input.
Features:
- Primary Color Filter
- 440 Lines of Resolution
- 50 db S/N
- 60 frames per second progressive output
- 10 lux minimum sensitivity
- Analog RGB Progressive output
- Analog RGB, Y/C and composite NTSC outputs
- Available with CameraLink output as KP-FD30CL
Applications:
- Industrial
- CCTV Security
- Machine Vision
| Imaging Device | 1/2" progressive scan interline CCD | |||||
| Effective Pixels | 659(H) × 494(V) | |||||
| Unit Cell Size | 9.9(H) x 9.9(V) m (Square pixel) | |||||
| Scanning Area | 7.48(H) × 6.15(V) mm | |||||
| Color Filter | R, G, B primary color mosaic fi lters on chip | |||||
| Scanning System (Selectable by switch) |
Progressive scan (VGA mode) 2:1 interlace scan (NTSC mode) |
|||||
| Frequency | Horizontal: 31.468 kHz Vertical: 59.94 Hz | |||||
| Sync System | Internal / external (HD/VD auto selection) | |||||
| Internal Sync Output | HD/VD/SYNC 2 Vp-p/75, Negative polarity WE: 5 Vp-p, Negative |
|||||
| External Sync Input | HD/VD 2 to 5 Vp-p, Negative polarity EXT. Trigger input: Low 0 VDC, High 2 to 5 VDC |
|||||
| Video Signal Output | RGB output (G on SYNC) Y/C output ( Only at the NTSC mode ) VBS output ( Only at the NTSC mode) |
|||||
| S/N (Y signal) | More than 50dB ( AGC, enhancer and gamma off ) | |||||
| Resolution (Y signal at center) |
Horizontal: 440 TV lines Vertical: 480 TV lines ( VGA mode ) 350 TV lines ( NTSC mode ) |
|||||
| Standard Sensitivity | 2,000 lx ( F5.6, 100IRE ) | |||||
| Minimum Illumination | 10 lx ( F1.4, AGC ON, 50IRE ) | |||||
| Sensitivity Selection | Gain Adjustable at AGC OFF and AGC Limit Gain | |||||
| Electric Shutter Speed | Selectable in 11 steps high spped shutter OFF(1/60), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000 1/10000, 1/20000, 1/30000, 1/50000 second : Approx. 1H steps from 1/60 second to 1/10,000 second |
|||||
| Auto Level Control [ALC] | ( The auto level control system of AES, lens iris and AGC. ) AVERAGE / PEAK&AVERAGE / AREA ( Scanning area is selectable from 9 area. ) |
|||||
| Auto-iris Lens Outputs [DC/VIDEO*] | DC ( Iris control voltage input type lens, cable length over 150mm ) : Coupling coil impedance Damper : 1,150 ±10% , Drive : 190 ±10% Power supply : 12 VDC, 60 mA Note :. "VIDEO" is optionally. |
|||||
| White Balance | Selectable in 3 modes Auto-tracking[ATW]:2,500K~6,000K preset [AWC] : (2,500K~10,000K) R/B gain manual control [MANUAL] (2,500K~10,000K) |
|||||
| Text Display | 24 alpha-numeric characters in one line (only KP-FD30) | |||||
| Picture Adjustment | Modes and settings can be selected and adjusted from on-screen menu (only KP-FD30) | |||||
| Remote Control | Modes and settings can be selected and adjusted from PC by RS-232C level, | |||||
| Power Supply | 12 VDC ± 10 % Approx.360 mA(KP-FD30) pprox.370mA(KP-FD30CL) (Including 60mA for auto-iris lens ) |
|||||
| Lens Mount | C/CS mount (Frange-back adjustment) | |||||
| Ambient Temperature | Operating : -10 to +50 C, (+14 to +122 F) 30 to 80 %RH Storage : -20 to +60 C(-4 to +144 F), 20 to 90 %RH |
|||||
| Vibration Endurance | 68.6 m/s2 (10 to 200Hz, 30 minutes each on XYZ axes) | |||||
| Shock Endurance | 490 m/s2 (vertical, horizontal, once each face) | |||||
| External Dimensions | 58(W) x 58(H) x 48(D) (not including lens and protrusions) | |||||
| Weight | Approx. 220g ( without lens ) | |||||