Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Hitachi KP-FD30CL Progressive Scan Color Camera
The KP-FD30CL is equipped with the progressive full frame RGB output of high frame rate (approx. 60 frame per second). The KP-FD30CL outputs Camera-Link and is equipped with external synchronization (HD/VD), the external trigger function, etc., it is suitable for the image-processing equipment input.
Features:
- Primary Color Filter
- 440 Lines of Resolution
- 50 db S/N
- 60 frames per second progressive output
- 10 lux minimum sensitivity
- Analog RGB Progressive output
- Analog RGB, Y/C and composite NTSC outputs
- CameraLink output
Applications:
- High Speed Image Processing
- Machine Vision
- Industrial
- Inspection
| Imaging Device | 1/2" Progressive Scan Interline CCD |
| Total Number of Pixels | 692(H) x 504(V) |
| No. of Effective Pixels | 659(H) × 494(V) |
| Unit Cell Size | 9.9(H) x 9.9(V) m (Square Pixel) |
| Scanning Area | 7.48(H) × 6.15(V) mm |
| Color Filter | R, G, B primary color mosaic filters on chip |
| Scanning System | Progressive scan (VGA Mode) 2:1 interlace scan (NTSC Mode) |
| Frequency | Horizontal: 31.468 kHz Vertical: 59.94 Hz |
| Sync System | Internal / external (HD/VD auto selection) |
| Internal Sync Output |
HD/VD/SYNC 2 Vp-p/75 , Negative polarity |
| External Sync Input |
HD/VD 2 to 5 Vp-p, Negative polarity |
| Video Signal Output |
RGB output (G on SYNC) |
| S/N (Y signal) | More than 50dB (AGC, enhancer and gamma off) |
| Resolution (Y signal at center) |
Horizontal: 440 TV lines Vertical: 480 TV lines (VGA mode) 350 TV lines (NTSC mode) |
| Standard Sensitivity | 2,000 lx (F5.6, 100IRE) |
| Minimum Illumination | 10 lx (F1.4, AGC ON, 50IRE) |
| Sensitivity Selection | Gain Adjustable at AGC OFF and AGC Limit Gain |
| Electric Shutter Speed |
PRESET: Selectable in 11 steps high spped shutter |
| Ext. Trigger | a) One trigger mode b) Fixed shutter mode NORMAL(1/60), 1/250, 1/500, 1/1000, 1/2000, 1/4000 1/10000, 1/50000 second Memory mode: OFF/ON |
| Auto Level Control[ALC] | (The auto level control system of AES, lens iris and AGC) AVERAGE / PEAK&AVERAGE / AREA (Scanning area is selectable from 9 area.) |
| Auto-Iris lens outputs [DC/VIDEO*] |
DC ( Iris control voltage input type lens, cable length over 150mm ) : Coupling coil impedance Damper : 1,150 ±10% , Drive : 190 ±10% Power supply : 12 VDC, 60 mA Note :. "VIDEO" is optionally. |
| White Balance | Selectable in 3 modes Auto-tracking[ATW]:2,500K~6,000K preset [AWC] : (2,500K~10,000K) R/B gain manual control [MANUAL] (2,500K~10,000K) |
| Remote Control | Modes and settings can be selected and adjusted from PC by RS-232C level, |
| Power Supply | 12 VDC ± 10 % Approx.360 mA(KP-FD30) pprox.370mA(KP-FD30CL) (Including 60mA for auto-iris lens) |
| Lens Mount | C/CS Mount (Flange-back adjustment) |
| Ambient Temperature | Operating : -10 to +50 C, (+14 to +122 F) 30 to 80 %RH Storage : -20 to +60 C(-4 to +144 F), 20 to 90 %RH |
| Vibration Endurance | 68.6 m/s2 (10 to 200Hz, 30 minutes each on XYZ axes) |
| Shock Endurance | 490 m/s2 (vertical, horizontal, once each face) |
| External Dimensions | 58(W) x 58(H) x 48(D) |
| Weight | Approx. 220g (without lens) |