The STC-MCS322U3V color camera features a IMX252 3.2MP global shutter sensor with 120fps , and an ultra compact 28 (W) x 28 (H) x 40 (D) mm size. This camera combines high megapixel resolution with blazingly fast frame rate in order to provide the best machine vision camera on the market.
STC-MCS322U3V-SE Models Also Available
These Sentech cameras are perfect for applications requiring high quality with it's IMX252 3.2MP global shutter sensor with 120fps.
Features:
Image Sensor | 1/1.8” 3.2M Progressive Color CMOS (Sony: IMX252LQR-C) |
Shutter Type | Global |
Active Picture Element | 2048 (H) x 1536 (V) |
Cell Size | 3.45 (H) x 3.45 (V) µm |
Sync System | Free run, External trigger (Hardware, Software) |
Maximum Frame Rate (Full Scan) | - |
-8Bit Output | 121.0 fps |
-10Bit Output | 60.5 fps |
-10bit Packed output | 91.6 fps |
-12Bit Output | 60.5 fps |
-12bit Packed output | 80.2 fps |
ADC bit width | 10bit / 12bit |
Video Format | 8/10/12 bit output (Support packed on 10bit, 12bit) |
Noise Level | - |
-8Bit Output | - |
-10bit / 10bit Packed Output | ≤ 12 LSBs (Gain 0 dB) |
-12bit / 12bit Packed Output | ≤ 48 Digit (gain 0 dB) |
Sensitivity | 550 Lux |
Exposure Time | - |
-8Bit Output | 19.0μseconds to 22 seconds |
-10Bit Output | 24.3μseconds to 44 seconds |
-10bit Packed output | 20.7μseconds to 29 seconds |
-12Bit Output | 24.3μseconds to 44 seconds |
-12bit Packed output | 21.7μseconds to 33 seconds |
Gain | - |
-Analog (Gain) | 0 to 24 dB |
-Digital (Gain) | 0 to 6 dB |
Black Level | - |
-8Bit Output | 0 to 31 |
-10bit / 10bit Packed Output | 0 to 127 |
-12bit / 12bit Packed Output | 0 to 511 |
White Balance | -40dB to 12dB |
ROI (AOI) | Horizontal: 64 to 2448 (2432 on Packed) / Vertical: 32 to 2048 Adjustable Steps for offset:16 pixels in horizontal direction (64 pixels on Packed) / 4 lines in vertical direction Adjustable Steps for offset: 4 pixels in horizontal direction / 4 lines in vertical direction |
Multi ROI | 16 Regions (Horizontal 4 regions x Vertical 4 regions) |
Gamma | Gamma Table =0.1 to 4.0 |
Binning | N/A |
Decimation | Individual x2 Horizontal, Vertical Decimation |
Image Flip | Horizontal / Vertical / Horizontal and Vertical / OFF |
Pixel Defect Correction | Up to 64 points |
Auto Image Control | - |
-Auto Exposure | Support |
-Auto Gain | Support |
-Auto White Blance | Support |
Operating Mode | Free-run / Edge-preset Trigger / Pulse width Trigger / Start Stop Trigger |
User Setting Storage | Support |
Communication | Via USB3.0 bus |
Interface | USB 3.0 Super Speed (USB 3.0 Micro B) |
Protocol | USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant and Sentech’s unique protocol (on Normal SDK, Trigger SDK) |
Input/Output | Three GPIO, One Camera Hardware Reset |
Power | - |
-Input Voltage | +5 Vdc through USB connector |
Consumption | -Consumption |