Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Pleora iPORT PT1000-LV External Frame Grabber
*Product is discontinued, No Current Replacement Options
High-performance GigE Vision connectivity for LVDS cameras.
Pleora’s iPORT™ PT1000-LV External Frame Grabbers allow system manufacturers and integrators to treat LVDS cameras as native GigE Vision® cameras. With these external frame grabbers, LVDS cameras enjoy the long-distance reach of Gigabit Ethernet (GigE) and can be mixed with native GigE Vision cameras in networked environments. System manufacturers and integrators can shorten time-to-market, lower design and system costs, and reduce development and deployment risk by reusing expensive or application-specific LVDS cameras in GigE Vision installations, with minimal software development. The PT1000-LV External Frame Grabbers interact seamlessly with Pleora's other products in networked or point-to-point digital video systems. The frame grabbers also comply fully with the GigE Vision® and GenICam™ standards, enabling them to interoperate with third-party equipment in multi-vendor systems.
The PT1000-LV converts video from LVDS cameras to packets and transmits it over a GigE link with low, predictable latency. GigE supports cabling distances of up to 100 meters using standard CAT5e/6 cabling. With off-the-shelf Ethernet switches, distances can be unlimited. The connection at the PC is a standard GigE plug, eliminating the need for a desktop PC with an available peripheral card slot. As a result, system designers can reduce system size, cost, and power consumption by using computing platforms with smaller form factors, such as laptops, embedded PCs, and single board computers. A sophisticated on-board programmable logic controller (PLC) allows users to precisely measure, synchronize, trigger, and control the operation of other vision system elements. The PT1000-LV is bundled with Pleora’s feature-rich application toolkit, eBUS™ SDK, and compatible with Pleora’s vDisplay™ External Frame Grabbers, which deliver video directly to a monitor.
Features:
- Transmits video from LVDS cameras supporting the TIA/EIA 644 standard over GigE with low, consistent latency
- Built-in PLC for advanced real-time synchronization and triggering
- RS-232 and GPIO to control external devices
Applications:
- Machine Vision
- Factory Automation
- Robotic Inspection
|
iPORT™ External Frame Grabbers |
•Purpose-built hardware compatible with TIA/EIA 644 LVDS cameras |
|
eBUS™ SDK |
•eBUS Universal Pro driver |
|
Gige Vision® |
•Fully-compatible firmware load •Guarantees delivery of all packets •Comprehensive data transfer diagnostics |
|
Accepts TIA/EIA- 644 Signals |
•Compatible with a wide range of cameras |
|
Integrated Acquisition Engine |
•Can acquire image data from a wide variety of sources, with pixel depths up to 16 bits, color or B/W, and multi-tap |
|
Free Running or Externally Triggered |
•Flexible acquisition modes |
|
Power |
•Enclosed: Hirose 6-pin (HR10A-7R-6P) |
|
Network |
•RJ-45 |
|
Video |
•Hirose 68-pin female MDR (DX10GM-68SE) |
|
Inputs *2 TTL Inputs *1 LVDS Input *1 optically Isolated Input Outputs: *2 TTL Outputs *1 Optically Isolated Output |
•Allows synchronization of multiple cameras or system elements |
|
2 RS-232 Serial Links |
•Enables advanced distributed processing and control architectures |
|
Delayer, Rescaler, General-Purpose Counter |
•Allows full synchronization with line scan cameras |
|
Timestamp Trigger, Counter, and Reset |
•Allows system actions to be triggered based on timestamps |
|
Gigabit Ethernet-Based |
•Low-cost, easy-to-use equipment •Compatible with 10/100/1000 Mb/s IP/Ethernet networks •Supports IEEE 802.3 (Ethernet), IP, IGMP v.2, UDP and ICMP (ping) •Long reach: 100 m point-to-point, further with Ethernet switches or fiber |
|
Multicast Capability |
•Enables advanced distributed processing and control architectures |
|
Size |
•Enclosed: 95 mm X 97 mm X 37 mm |
|
Operating Temperature |
•Enclosed: 0°C to 45°C |
|
External Power Supply |
•4.5V to 16V |
|
Power Consumption |
•2.5 W |
|
ORDERING INFORMATION |
|
|
900-4005 |
•iPORT PT1000-LV External Frame Grabber Board set with 16 MB SDRAM |
|
900-4006 |
•iPORT PT1000-LV External Frame Grabber enclosed product with 16 MB SDRAM |
|
900-4002 |
•iPORT PT1000-LV External Frame Grabber Evaluation Kit, which contains 900-4006, |