Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Pleora iPORT CL-Ten Full (905-0008) Back View With Power Port

Pleora iPORT CL-Ten Full (905-0008) External Frame Grabber In Mountable Enclosure

Pleora iPORT Analog-Pro (900-6208) Front Angled View With & Without  Mountable Case

Pleora iPORT Analog-Pro (900-6208) External Frame Grabber With Development Kit

Pleora iPORT Analog-Pro (900-6209) External Frame Grabber

Pleora's iPORT Analog-Pro (900-6209) SD External Frame Grabbers convert standard definition analog video to GigE Vision protocol. Accepts 1 or 2 channels of composite video (NTSC, PAL, CCIR, RS-170) for simultaneous transmission over a single Gigabit Ethernet link.

SKU
Pleora iPORT Analog-Pro (900-6209)

Pleora’s iPORT™ Analog-Pro External Frame Grabbers allow system manufacturers and integrators to treat analog cameras as native GigE Vision® cameras.

With these external frame grabbers, analog cameras enjoy the long-distance reach of Gigabit Ethernet (GigE) for both video and remote control, and can be mixed with native GigE Vision cameras in networked environments. System manufacturers can shorten time-to-market, reduce development and deployment risk, and lower design and system costs by reusing expensive or application-specific analog cameras in GigE Vision installations, with minimal software development.

iPORT Analog-Pro External Frame Grabbers interact seamlessly with Pleora's other products in networked or point-to-point digital video systems. The frame grabbers also comply fully with the GigE Vision and GenICam™ standards, enabling interoperation with third-party equipment in multi-vendor environments. Compact and simple to integrate, Analog-Pro external frame grabbers can transmit two channels of composite (NTSC, PAL, CCIR, or RS-170) video simultaneously at up to 30 frames per second (fps) each with low, predictable latency over a GigE link. GigE supports cabling distances of up to 100 meters using standard CAT5e/6 wiring. With off-the-shelf Ethernet switches, distances can be unlimited. At the PC, Analog-Pro External Frame Grabbers connect via GigE, eliminating the need for a desktop computer with an available peripheral card slot. As a result, system designers can reduce system size, cost, and power consumption by using computing platforms with smaller form factors, such as laptops, embedded PCs, and single board computers. The Analog-Pro is bundled with Pleora’s feature-rich application toolkit, eBUS™ SDK, and compatible with Pleora’s vDisplay™ External Frame Grabbers, which deliver video directly to a monitor.


Features:

  • Transmits two independent channels of analog composite video over GigE with low, consistent latency
  • Built-in de-interlacing algorithms
  • Supports square pixels (Q4 2013)
  • RS-232 and GPIO to control external devices
  • Available as enclosed units and OEM board sets


Applications:

  • Machine Vision
  • Robotics
  • Factory Automation 
  • Sports Arena Applications
  • Security 
  • Military 
  • Aviation 
  • Medical

iPORT™ External Frame Grabbers

•Highly reliable; up to 1 Gb/s data transfer rate with low, end-to-end latency
•OEM board set or enclosed unit
•32MB image buffer
•4 TTL inputs, 3 TTL outputs (4th TTL output available with customer-supplied connector); software-controllable
•2 RS-232 serial ports

eBUS™ SDK                   

•eBUS Universal Pro driver
•Sample applications, including NetCommand™ sample application, a demonstration of multi-device network connectivity
•Driver installation tool
•Documentation

Gige Vision® and GenICam™

•Fully-compatible firmware load

•Guarantees delivery of all packets

•Comprehensive data transfer diagnostics 

Video Standards

•NTSC, PAL, CCIR, RS-170

Pixel Formats

•8-bit Monochrome,YUV4:2:2 (packed)  

Deinterlacing Support

•Off

•Weave 

•Line duplication

Power

•Enclosed: Hirose 6-pin

•OEM: 2-pin, 0.10” header

Network 

•RJ-45 female 

Video Interface 

•2 x BNC female

Serial and GPIO 

•12-pin round, locking connector       

Gigabit Ethernet Based 

•Low-cost, easy-to-use equipment

•Compatible with 10/100/1000 Mb/s Ethernet networks

•Supports IEEE 802.3 (Ethernet), IP, IGMP v.2, UDP and ICMP (ping)

•Long reach: 100 m point-to-point, unlimited distance with Ethernet switches

Multicast Compatibility

•Enables advanced distributed processing and control architectures

Size (L x W x H)  

•Enclosed: 113mm x 82mm x 51mm

•OEM: 105 mm X 52 mm X 42 mm

Operating temperature

•0 ºC to 40 ºC (OEM higher with thermal pad)

Storage temperature

•-40°C to 85°C

Power Supply  

•5 V to16 V

Power Consumption

•Maximum 4W (with both channels in use)

 

ORDERING INFORMATION

 900-6207                  

iPORT Analog-Pro SD OEM Kit. Analog-Pro OEM board set assembled on a carrier bracket*, GPIO board assembly with flat-flex cable, and unsoldered 12-pin circular connector.

 900-6209    

iPORT Analog-Pro SD Enclosed. Analog-Pro in mountable enclosure.
NB - GENERALLY AVAILABLE, NOT FOR NEW DESIGNS
NB - An external power supply is required. Does not include power supply.

 900-6208    

iPORT Analog-Pro SD Development Kit. Includes 900-6209, power supply, Gigabit Ethernet desktop NIC, Ethernet cable, and eBUS SDK USB stick.
NB - GENERALLY AVAILABLE, NOT FOR NEW DESIGNS
NB – The eBUS SDK provided on the USB stick is unsupported, without access to maintenance releases, and does not provide any runtime licenses for your workstations. If any of these items are needed, recommend the purchase of the eBUS SDK Seat License (990-1024).