Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

CIS Americas | VCC-F32S29CL | CL Camera Image #1

CIS Americas VCC-F32 Series VCC-F32S29CL

Hitachi KP-F230  | PoCL Monochrome Image #1

Hitachi KP-F230 PCL Monochrome

Hitachi KP-F500 PoCL Monochrome

PoCL (Power over Camera Link) Camera
SKU
KP-F500 PCL Monochrome

The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.

  • High Resolution & High Speed
    High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.
  • Frame Shutter
    Higher resolution in the vertical directional is ensured for moving object.
  • Multi-step Shutter
    Provided multi-step shutter or variable shutter (minimum 1/100,000 second) .
  • Frame on Demand
    The trigger and the shutter can be used to capture an image at the desired timing and the accumulation time.
  • Remote Control
    Through the Camera Link interface, various setting such as shutter, mode, gain, partial scan, bit width, etc can be adjusted.
  • Imager 2/3-inch interline CCD
    Total pixels 2536 (H) x 2068(V)
    Effective pixels 2456 (H) x 2058(V)
    Active pixels 2448 (H) x 2050(V)
    Pixel size 3.45 (H) x 3.45 (V) µm (square lattice)
    Sensing area 9.93 (H) x 8.70 (V) mm
    Scanning system Progressive
    Aspect ratio 4:3
    Frame rate 16 frames/second
    Horizontal drive
    frequency
    64.000 MHz
    Horizontal scanning
    frequency
    33.264 kHz
    Vertical scanning
    frequency
    16.00 Hz
    Sync system Internal
    Lens mount C mount
    Flange focal distance 17.526 mm
    Video output Digital output Camera Link
    Clk = 64 MHz x 1ch or 32 MHz x 2ch
    Resolution Horizontal/Vertical: 2000TV lines
    Sensitivity 400 lx, F4, 3200 K
    Minimum illumination 1.0 lx, F1.4, MAX GAIN, without IR cut filter
    Signal noise to ratio 50 dB
    Electronic shutter speed 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2,000, 1/10,000, 1/50,000 second.
    Factory setting is off (1/16 second) or changeable by variable shutter (Minimum 1/100,000 second)
    Gamma compensation y = 1
    Frame on demand Remote setting (fixed shutter, one trigger and VD
    reset) Factory setting is all off.
    Partial scan Selectable start position and width of picture
    grabbing in 1H step.
    Ambient temperature Operating: 0 to + 40°C (+32 to +104ºF), less
    than 90 % RH
    Storage: -10 to + 50°C (+14 to +122ºF), less
    than 70 % RH
    Power supply voltage 12 ±1 VDC
    Current consumption Approx. 400 mA (Approx. 4.8 W)
    External dimensions 44 (W) x 44 (H) x 41 (D) mm
    Mass Approx. 110 g