The PoCL version is connected by a single (PoCL) Mini Camera Link cable directly to a frame grabber supporting PoCL. Simple systems construction is possible.
Imager | 1/1.8-inch interline CCD | |||||
Total pixels | 1688 (H) x 1248(V) | |||||
Effective pixels | 1628 (H) x 1236(V) | |||||
Active pixels | 1628 (H) x 1236(V) | |||||
Pixel size | 4.4 (H) x 4.4 (V) µm (square lattice) | |||||
Sensing area | 7.16 (H) x 5.44 (V) mm | |||||
Scanning system | Progressive | |||||
Aspect ratio | 4:3 | |||||
Frame rate | 30 frames/second | |||||
Horizontal drive frequency |
72.000 MHz | |||||
Scanning frequency | Horizontal: 37.5 kHz Vertical: 30 Hz |
|||||
Sync system | Internal | |||||
Lens mount | C mount | |||||
Flange focal distance | 17.526 mm | |||||
Video output | Digital output Camera Link Clk = 36 MHz x 2 TAP |
|||||
Resolution | Horizontal/Vertical: 1200 TV lines | |||||
Sensitivity | 400 lx, F4, 3200 K | |||||
Minimum illumination | 7.4 lx, F1.4, MAX GAIN | |||||
Signal noise to ratio | 45 dB | |||||
Electronic shutter speed | 1/30 to 1/100000 second (variable setting) |
|||||
Gamma compensation | y = 1 | |||||
Frame on demand | One trigger, fixed shutter and VD reset | |||||
Partial scan | Selectable start position and width of picture grabbing in 1H step. | |||||
Offset | 0 to 128 steps level/10bit 33 steps variable (Factory setting: 0 steps level) |
|||||
Gain Setting | 0 to +12 dB (128 steps variable) | |||||
Ambient temperature | Operating: 0 to + 40°C (+32 to +104ºF), less than 90 % RH Storage: -10 to + 50°C (+14 to +122ºF), less than 70 % RH |
|||||
Power supply | 12 ±1 VDC | |||||
Current consumption | Approx. 270 mA (Approx. 3.3 W) | |||||
External dimensions | 29 (W) x 29 (H) x 38 (D) mm | |||||
Mass | Approx. 60 g |