dPict Imaging DP-800S 4K Sony Block Camera Interface Board

Serial Digital Interface (SDI)

The DP-800S converts HDMI camera data from Sony 4K series block cameras to SDI. It supports a level A or level B 6G-SDI output over a single BNC.

Flexible FPGA-Based Design

The DP-800S is designed with a powerful FPGA with multiple high-speed, low-latency transceivers with integrated advanced signal conditioning and clock data recovery. Each transceiver supports maximum frequencies up to 12.5G that can be used for a variety of high-speed video data interfaces.

Full Integration

The DP-800S solution offers a complete board and camera control for custom OEM integration. A 30-pin micro-coax cable connects to the Sony block camera for video data transfer and camera communication. The DP-800S provides power to the Sony block and also supports the transfer of Sony VISCA commands through an optional USB cable.

Features:

• Interface board for Sony 4K block cameras
• Supports FCB-ES8230, FCB-ER8300, FCB-ER8530, and FCB-ER8550
• Converts camera HDMI to SDI
• Supports all camera resolutions
• Supports camera genlock (FCB-ER8550 only)
• Automatic camera resolution detection
• On-board frame buffer for robust transmission
• Power, USB and VISCA interface to camera
• Flexible FPGA-based design
• Optional Camera Integration Kit

SDI Resolution Support

QFHD

• 3840 × 2160 29.97p
• 3840 × 2160 25p
• 3840 × 2160 23.98p

FHD

• 1920 × 1080 59.94p
• 1920 × 1080 50p
• 1920 × 1080 59.94i
• 1920 × 1080 50i
• 1280 × 720 59.94p
• 1280 × 720 50p
• 1280 × 720 23.98p

Physical and Environmental

• 3.00"(length) x 2.00" (height)
• Operating temperature: 0° C to 70° C
• Relative humidity: 5% up to 95% non-condensing
• KEL 30-pin IDC connector (Sony interface)
• SMB Connector (SDI Output)
• Micro USB
• 2.2mm Barrel (Power)