Watec WAT-902HB2S B/W CCTV Board Camera, Super High Sensitivity (.0003Lux), 1/2" CS mount, 570 TVL, 12VDC
Product is Discontinued, replacement camera is: WAT-1100MBD
The Watec WAT-902HB2S is a Super High Sensitivity Adjacent to Near Infra-Red Ray, Exposed Single PC Board camera. The Watec WAT-902HB2S features include back light compensation, gain control, internal sync and adjustable shutter speeds.
Signal System
|
NTSC |
Pick-up element
|
1/2inch interline transfer CCD image sensor |
Number of total pixels
|
811 (H) X 508 (V) (EIA) / 795 (H) X 596 (V) (CCIR) |
Effective pixels
|
768 (H) X 494 (V) (EIA) / 752 (H) X 582 (V) (CCIR) |
Unit cell size | 8.4μm(H)×9.8μm(V) (EIA) 8.6μm(H)×8.3μm(V) (CCIR) |
Scanning system | 2:1 interlace |
Synchronizing system | Internal |
Video output | Composite video, 1Vp-p, 75ohm Unbalanced |
Resolution(Horizontal) | 570 TVL (center) |
Minimum illumination | 0.0003 lx. F1.4 |
Gamma Correction | γ≒0.45(ON) (option: γ≒1.0(OFF)) |
AGC | HI: 5~50dB, LO: 5~32dB (option: OFF=5dB) |
S/N Ratio | 50dB (AGC OFF) |
AE Mode | EI=(1/60~1/100,000(EIA) or 1/50~1/100,000(NTSC)), (Option: ES=OFF(1/60(EIA), 1/50(CCIR)), FL, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, or 1/100000) |
Backlight Compensation | ON/OFF |
Lens Mount | CS-mount |
Connection terminal | Power, Video out, GND |
Power supply | DC10V~14V (DC12V±15% recommended) |
Current | 160mA (Max.190mA w/ AI lens) |
Operating temperature | -10℃ ~ +40℃ |
Storage temperature | -30℃ ~ +70℃ |
Dimensions | 40.0 (W) X 40.0 (H) X 17.0 (D)mm (projections not included) |
Weight | Approx. 25g |
Accessories | K-59 (connector & cables), Hex key wrench |