Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Watec WAT-660MD G3.8 Dome Camera, 1/4

Watec WAT-660MD G3.8 Dome Camera, 1/4" format, 380 lines, 3.8mm lens

Watec WAT-660D G1.9 EIA B/W Miniature Board Camera w/1.9mm Glass Lens Image

Watec WAT-660D G1.9 EIA B/W Miniature Board Camera w/1.9mm Glass Lens

Watec WAT-660MDWB Dome Camera,1/4" format, 380 TVL, 3.8mm lens, Wall/Surface Mount

WATEC WAT-660MDWB B/W CCTV Dome Camera,1/4" format, 380 TVL, 3.8mm lens, Wall/Surface Mount
SKU
Watec WAT-660MDWB

The WATEC WAT-660MDWB is a FLUSH/SURFACE MOUNT DOME CAMERA with Blinded Housing w/ Slit Window & Yoke Lens Mount w/ Manual Pan/Tilt Settings.

Signal System
NTSC
Pick-up element
1/4 inch interline transfer CCD image sensor
Number of total pixels
537 (H) X 505 (V) (EIA) ; 537 (H) X 597 (V) (CCIR)
Effective pixels
510 (H) X 492 (V) (EIA) ; 500 (H) X 582 (V) (CCIR)
Unit cell size 7.15μm (H) X 5.55μm (V) (EIA) ; 7.3μm (H) X 4.7μm (V) (EIA)
Scanning system 2:1 interlace
Synchronizing system Internal
Video output Composite video, 1Vp-p, 75ohm Unbalanced
Resolution(Horizontal) 380TV lines (Glass f3.8mm, Center)
Minimum illumination 0.08 lx. F2.0 (Glass f3.8mm)
Gamma Correction γ≒0.45
AGC 5~32dB
S/N Ratio 46dB (AGC OFF)
Electronic iris 1/60 ~ 1/100,000 sec. (EIA), 1/50 ~ 1/100,000 sec. (CCIR)
Standard lens Glass, f3.8mm, F2.0
Connection Terminal Video out, Power, GND
Power Supply DC +9.0~9.9V
Current max. 110mA
Operating temperature -10℃ ~ +40℃
Storage temperature -30℃ ~ +70℃
Dimensions φ78.0×64.0 (H)mm
Weight Approx. 115g
Accessories Screw(M3.1×16)×3, Screw(M2.4×10)×3