Watec 600CX High-Sensitivity Color Camera
*Product is discontinued
The Watec WAT-600CX is Watec latest power/video over coax camera. With 540TV of color resolution this new low light color version makes for an easy and quick install.
The high quality image production and compact size of the WAT 600CX camera offer the perfect solution for those applications demanding a single coax pair from camera to RX/monitor installation.
Features:
Sensor type | 1/3 inch interline transfer CCD image sensor |
Number of total pixels | 768(H) × 494(V) |
Number of effective pixels | 1984(H) × 1225(V) |
Unit cell size | 2.8μm × 2.8μm |
Imaging system | RGB primary color mosaic filter |
Sync system | Internal |
Scanning system | Progressive |
Output Size | 160×120, 176×144, 320×240, 640×480, 1280×720, 1280×800, 1280×1024, 1920×1080 |
Max. frame rate | 30 fps |
Video output | USB Micro-B, USB Video Class (Compatible) |
Minimum Illumination | 0.5 lx F1.8 (1/30s) |
AE mode | Fixed: 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000 sec EI: 1/30 - 1/8000 sec. ※Slow shutter: 1/15 - 1/8000 sec. |
White Balance | ATW: 2800 to 9500K Manual: 2800 to 6500K |
AGC | 0 - 42dB |
MGC | 0 - 24dB (25 steps) |
Gamma characteristics | ON / OFF |
Backlight Compensation | ON (Center) / OFF |
Power Supply | DC+5V (Supplied by the USB bus) |
Power Consumption | 0.6 W (120 mA) |
Temperature | Operating: 14 to 122°F / -10 to 50°C (approximately) Storage: -22 to 158°F / -30 to 70°C (approximately) |
Humidity | Operating: 95%RH or less (w/o condensation) Storage: 95%RH or less (w/o condensation) |
Standard lens | M3718BC-12 (f3.7 F1.8) |
Cable length | 1.2m |
Weight | 85g (approximately) |