The STC-TB83USB is a compact, progressive scan, XGA, USB cameras with a 1/3" monochrome CCD, featuring 29.18fps (XGA), software triggering, image capture, digital zoom and a feature-rich user based menu set up and control. This series is available in a board or cased version, with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.
Specifications | ||
Signal Format | XGA Monochrome | |
Image Sensor: | 1/3” CCD | |
Minimum Frame Rate: | ||
Full Scan
|
29.18 fps | |
1/2 Partial Scan
|
60.02 fps | |
1/4 Partial Scan
|
120.35 fps | |
Total Picture Element: | 1077 (H) x 788 (V) | |
Effective Picture Element: | 1034 (H) x 779 (V) | |
Active Picture Element: | ||
Full Scan
|
1024 (H) x 768 (V) | |
1/2 Partial Scan
|
1024 (H) x 344 (V) | |
1/4 Partial Scan
|
1024 (H) x 136 (V) | |
Chip Size: | 5.80 (H) x 4.92 (V) mm | |
Cell Size: | 4.65 (H) x 4.65 (V) µm | |
Pixel Clock Frequency: | 29.5MHz | |
Scanning Method: | Full, Partial scanning (1/2, 1/4) | |
Sync System: | Internal Sync | |
Scanning System: | Progressive | |
Shutter Speed: | Auto / Manual (Software Selectable) | |
Minimum Illumination: | 9.5 Lux at F1.2 | |
Gain: | Auto / Manual (Software Selectable) | |
Gamma: | Manual (Software Selectable) | |
Lens Mount: | CS Mount / Fixed Lens | |
White Balance: | Auto / Manual / One-shot | |
Video Output: | USB 2.0 High Speed | |
Shock and Vibration: | Vibration: 10G (20 to 200Hz) Shock: 70G (3 Directions, 3 Times Each) |
|
Power: | ||
Input Voltage
|
+5 V through USB port | |
Consumption
|
< 500mA | |
Temperature: | ||
Operating
|
0°C ~ 40°C (32F° ~ 104°F) | |
Storage
|
30°C ~ 65°C (-29°C ~ 149°C) | |
Dimensions: |
45 (W) x 45 (H) x Variable (D) mm |
|
Weight: | Approximately 145g (55.114oz) |