The STC-TB202USB is a compact, progressive scan, UXGA, USB cameras with a 1/1.8" Monochrome CCD, featuring 15fps (UXGA), software triggering, image capture, digital zoom and a feature-rich user based menu set up and control. This series is available in a board or cased version, with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.
Specifications | ||
Signal Format | UXGA Monochrome | |
Image Sensor: | 1/1.8” CCD | |
Minimum Frame Rate: | ||
Full Scan
|
15.32 fps | |
1/2 Partial Scan
|
30.63 fps | |
1/4 Partial Scan
|
61.27 fps | |
Total Picture Element: | 1688(H) x 1248(V) | |
Effective Picture Element: | 1628(H) x 1236(V) | |
Active Picture Element: | ||
Full Scan
|
1600(H) x 1200(V) | |
1/2 Partial Scan
|
1600(H) x 548(V) | |
1/4 Partial Scan
|
1600(H) x 208(V) | |
Chip Size: | 8.50 (H) x 6.80 (V) mm | |
Cell Size: | 4.40 (H) x 4.40 (V) µm | |
Pixel Clock Frequency: | 36.818MHz | |
Scanning Method: | Full, Partial scanning (1/2, 1/4), Variable | |
Sync System: | Internal Sync | |
Scanning System: | Progressive | |
Shutter Speed: | Auto / Manual (Software Selectable) | |
Minimum Illumination: | 9.5 Lux at F1.2 | |
Gain: | Auto / Manual (Software Selectable) | |
Gamma: | Manual (Software Selectable) | |
Lens Mount: | C Mount | |
White Balance: | Auto / Manual / One-shot | |
Video Output: | USB 2.0 High Speed | |
Shock and Vibration: | Vibration: 10G (20 to 200Hz) Shock: 70G (3 Directions, 3 Times Each) |
|
Power: | ||
Input Voltage
|
+5 V through USB port | |
Consumption
|
< 500mA | |
Temperature: | ||
Operating
|
0°C ~ 40°C (32F° ~ 104°F) | |
Storage
|
-30°C ~ 65°C (-29°C ~ 149°C) | |
Dimensions: | 45 (W) x 45 (H) x Variable (D) mm (1.771” x 1.771” x Variable) |
|
Weight: | Approximately 145g (55.114oz) |