Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-SCA503POE (STCSCA503POE) 5MP GigE, Color Camera (CMOS Sensor: Aptina MT9P031/12STC)
The STC-SCA503POE is part of Omron/Sentech's Brand New Power over Ethernet GigE cameras, featuring an Aptina CMOS Sensor (CMOS Sensor: Aptina MT9P031/12STC)
*Product is discontinued
The Omron/Sentech STC-SCA503POE features a 1/2.5" color QSXGA sensor, 14 fps and communication Ethernet connector. The STC-SCA503POE boasts a compact 35(w) x 35(H) x 53.5 (D) mm size. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.
Features:
- 1/2.5" CMOS Sensor
- 5MP-VGA Scalable Resolution
- GigE Vision 1.2 GenLCam 1.4 Compliant
Applications:
- Machine Vision
- Industrial Inspection
- ITS
- Security
- Medical Imaging
Imaging
|
Model No |
STC-SCA503POE |
|
Image Sensor |
1/2.5" 5 MP CMOS; (Aptina: MT9P031/12STC) |
|
Active Picture Element |
2592 (H) x 1944 (V) |
|
Scanning System |
Full scanning, Variable ROI |
|
Cell Size |
2.2 (H) x 2.2 (V) µm |
Function
|
Shutter Type |
Rolling Shutter / Global Reset |
|
Scan Mode |
Full Scan / AOI |
|
Vertical Frequency (Frame Rate) |
QSXGA: 2592 (H) x 1944 (V): 14 FPS |
|
Video Output |
BGR8bit, RAW8bit/10bit/12bit, BayerRG10Packed/12Packed |
|
- Noise Level: @ 10 bit output |
<= 13 Digit (Gain 0 dB) |
|
Minimum Scene Illumination |
16 Lux @ F1.2,14 Hz |
|
ALC |
AE and AGC (ON/OFF) |
|
Exposure Time |
Preset continuous mode: 32 useconds to 16,777,215 mseconds, Preset trigger mode: 32 useconds to 16,777,215 mseconds, TriggerWidth (Pulse width) mode: 32 useconds to Non-limit mseconds |
|
Gain |
- |
|
- Analog (Gain) |
0 ~ 7.51 dB |
|
- Digital (Gain) |
Up to 18.69 |
|
Gamma |
Gamma 1.0 (Factory default) or downloadable gamma table (Default:1) |
|
AOI Function |
AOI (H: 32 to 2592 Pixel / V: 32 to 1944 Line) Unit： H 8 Pixel / V 2 Line |
|
Binning |
H: 1/2, V: 1/2, 1/4 |
|
Decimation(Skipping) |
Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 |
|
Flip Image |
N/A |
|
Pixel Blemish Correction |
Maximum 64 points (Default:ON) |
|
White Balance |
Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF) |
|
Operating Mode |
Free Run, Edge preset trigger, Trigger Width (Pulse width) (Default:OFF) |
|
Protocol |
IEEE802.3 (1000BASE-T) |
|
Communication |
GigE Vision® 1.2 and GenICam™ 1.4 Compliant |
|
I/Os |
One opt-isolated input and two open collector outputs(+3.3V) |
|
Power |
- |
|
- Input Voltage |
+10.8 to +26.4 Vdc (IO Connector) or Power Over Ethernet(IEEE802.3af compliance) |
|
- Consumption |
Power over Ethernet: Less than 3.0 W, +12Vdc: Less than 3.2 W |
Mechanical
|
Dimensions |
35 (W) x 35 (H) x 53.5 (D) mm excluding connectors |
|
Optical Filter |
With IR Cut Filter |
|
Optical Center Accuracy |
Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg |
|
Material |
Aluminum (AC) |
|
Lens Mount |
C Mount |
|
Connectors |
RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent |
|
Camera Mount Screws |
Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate) |
|
Weight |
Approx. 97g |
Environmental
|
Operating Temperature |
- |
|
- Minimum |
Environmental Temperature: -5°C |
|
- Maximum |
Camera housing temperature (top plate) shall not exceed 65°C (This corresponds to an environmental temperature of approx. 40°C) |
|
Storage Temperature |
Environmental Temperature -30 ~ 65°C |
|
Vibration |
20 Hz ~ 200 Hz ~ 20 Hz (5 min. /cycle), Acceleration 10G, XYZ 3 directions 30 minutes each |
|
Shock |
Acceleration: 38G, half amplitude 6 ms, 3 times, XYZ each direction |
|
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 |
|
RoHS |
RoHS Compliant |