Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-SBE132POE (STCSBE132POE) 1.3MP GigE, Monochrome Camera (CMOS Sensor: EV76C560ACT-EQV)
The STC-SCE132POE boasts a compact 35(w) x 35(H) x 54.3 (D) mm size. This camera meets all industry standards for GigE Vision® and GenICam™, and is compatible with all standard industry drivers. The GigE PoE series is available now at an extremely low cost.
Features:
- 1.1/8" e2v CMOS Sensor
- SXVGA: 1280 (H) x 1024 (V)
- 1.2 GenICam 1.4 Compliant
Applications:
- Industrial Applications
- Medical Applications
- Factory Automation
- Industrial Inspection
Imaging
|
Model No |
STC-SCE132POE |
|
Image Sensor |
1/1.8" 1.3MP Color CMOS (e2V: EV76C560ACT-EQV) |
|
Active Picture Element |
1280 (H) x 1024 (V) |
|
Cell Size |
5.3 (H) x 5.3 (V) µm |
Function
|
Scanning System |
Full scanning, Variable ROI |
|
Shutter Type |
Global Shutter |
|
Scan Mode |
Full Scan / AOI |
|
Vertical Frequency (Frame Rate) |
SXVGA: 1280 (H) x 1024 (V): 61 FPS |
|
Video Output |
Mono8, Mono10, Mono10Packed, BayerRGB8, BayerRGB10, BayerRGB10Packed, RGB8Packed |
|
- Noise Level: @ 10 bit output |
<= 12 Digit (Gain 0 dB) |
|
Minimum Scene Illumination |
TBD Lux @ F1.2 |
|
ALC |
AE and AGC (ON/OFF) |
|
Exposure Time |
Preset continuous mode: 10 useconds to 1,000,719 useconds Preset trigger mode: 10 useconds to 1,000,719 useconds |
|
Gain |
- |
|
- Analog (Gain) |
0 ~ 5.952 dB |
|
- Digital (Gain) |
0 ~ 6 dB |
|
Gamma |
Gamma 1.0 (Factory default) or uploadable gamma table (Default:1) |
|
AOI Function |
AOI (H: 32 to 1280 Pixel / V: 32 to 1024 Line） Unit： H 8 Pixel / V 2 Line |
|
Binning |
H: 1/2, V: 1/2 |
|
Decimation(Skipping) |
Horizontal 1/2, 1/4, Vertical 1/2, 1/4 |
|
Flip Image |
Horizontal |
|
Pixel Blemish Correction |
Maximum 64 points (Default:ON) |
|
White Balance |
Auto, Manual, Push to Set, White Balance are available, on both raw data and RGB outputs (Default:OFF) |
|
Operating Mode |
Free Run, Edge preset trigger, Trigger Width (Pulse width) (Default:OFF) |
|
Protocol |
IEEE802.3 (1000BASE-T) |
|
Communication |
GigE Vision® 1.2 and GenICam™ 1.4 Compliant |
|
I/Os |
One opt-isolated input and two open collector outputs(+3.3V) |
|
Power |
- |
|
- Input Voltage |
+10.8 to +26.4 Vdc (IO Connector) or Power Over Ethernet(IEEE802.3af compliance) |
|
- Consumption |
Less than TBD W |
Mechanical
|
Dimensions |
- |
|
- C-Mount Color: |
35 (W) x 35 (H) x 54.3(D) mm excluding connectors |
|
- CS-Mount Color: |
35 (W) x 35 (H) x 49.3(D) mm excluding connectors |
|
Optical Filter |
With IR Cut Filter |
|
Optical Center Accuracy |
Positional accuracy in H and V directions:: ±0.3 mm, Rotational accuracy of H and V: ±1.0 deg |
|
Material |
Aluminum (AC) |
|
Lens Mount |
C-Mount, CS-Mount |
|
Connectors |
RJ45 connector, Power- I/O connector: HR10A-10R-6PB (Hirose) or equivalent |
|
Camera Mount Screws |
Two 1/4'' Tripod screw holes (one each on top and bottom plate) Twelve M4 screws holes (four each on top and bottom plate, two each on both side plate) |
|
Weight |
Approx. 100g |
Environmental
|
Operating Temperature |
- |
|
- Minimum |
Environmental Temperature: -5°C |
|
- Maximum |
Camera housing temperature (top plate) shall not exceed 40°C, (This corresponds to an environmental temperature of approximately 62°C) |
|
Storage Temperature |
Environmental Temperature -30 ~ 65°C |
|
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
|
Shock |
Acceleration: 38G, half amplitude 6 ms, 3 times, XYZ each direction |
|
Standard Compliancy |
EMS: EN61000-6-2, EMI: EN55011 |
|
RoHS |
RoHS Compliant |