It features 60fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control. The STC-SB33USB-B is a board model available with rear or side mini-USB connectors.
Ultra-Compact Size
|
1/3" CCD Image Sensor, VGA (0.3 Megapixel)
|
Hardware & Software Trigger
|
Name |
Specifications |
---|---|
Image Sensor
|
1/3" interline VGA monochrome progressive CCD: ICX424AL(Sony)
|
Total Picture Element
|
692(H) x 504(V)
|
Effective Picture Element
|
659(H) x 494(V)
|
Chip Size
|
5.79(H) x 4.89(V) mm
|
Cell Size
|
7.40(H) x 7.40(V) μm
|
Scanning System
|
Progressive
|
Resolution
|
640(H) x 480(V) (Full scanning) 640(H) x 224(V) (1/2 partial scanning) 640(H) x 80(V) (1/4 partial scanning)
|
Scanning Method
|
Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning, Binning scanning, Binning 1/1 partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanning, Binning variable partial scanning
|
Maximum Frame Rate
|
-
|
- Full Scanning
|
59.94 fps (Normal) / 29.97 fps (1/2clock) / 14.98 fps (1/4clock) / 89.91 fps (3/2clock)
|
- 1/2 Partial Scanning
|
120.11 fps (Normal) / 60.05 fsp (1/2clock) / 30.02 fps (1/4clock) / 180.165 fps (3/2clock)
|
- 1/4 Partial Scanning
|
240.22 fps (Normal) / 120.11 fps (1/2clock) / 60.055 fps (1/4clock) / 360.33 fps
|
Pixel Frequency
|
24.5454 MHz (Normal) / 12.2727 MHz (1/2clock) / 6.13635 MHz (1/4clock) / 36.818 MHz (3/2clock)
|
Video Output
|
8bit / 10bit /12bit
|
Minimum Scene Illumination
|
TBD
|
Sync System
|
Internal
|
Electronic Shutter
|
Auto / Manual (software selectable)
|
- Normal
|
1/36,818,182 to 1/22.40 seconds(default 1/29.18 seconds)
|
- 1/2 Clock
|
1/18,409,091 to 1/11.20 seconds
|
- 1/4 Clock
|
1/9,204,545 to 1/5.60 seconds
|
Gain
|
Auto / Manual (software selectable,default: x3.55)
|
Gamma
|
Manual (software selectable,default: 1)
|
White Balance
|
-
|
Trigger Mode
|
Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable) (Hardware trigger and Software trigger are available)
|
Camera Reset
|
Support on Pin 5
|
LED Indicator
|
Green(Flicker):Power-On, Green:Camera works
|
Pixel Blemish Correction
|
64 Points (default:off)
|
Input / Output
|
USB2.0 High speed
|
Power
|
-
|
- Input Voltage
|
+5 V through USB connector (+4.4 to +5.25V)
|
- Consumption
|
less than 2.0 W
|
Dimensions
|
Board Type::36(W) x 36(H) x 15.3(D) CS-Mount(without USB connector)
|
Lens Mount
|
CS mount / MicroLens Mount / None Mount
|
Weight
|
approximately 15g
|
Interface Connector
|
-
|
- Angle
|
USB: mini-B USB connector IO Connector :SM05B-SRSS-TB (JST) 5pin
|
Operating Temperature
|
0 to 40 deg. C
|
Storage Temperature
|
-30 to 65 deg. C
|
Vibration
|
20Hz to 200Hz to 20Hz (5min./cycle), acccelaration 10G, 3 directions 30 min. each
|
Shock
|
Acceleration 70G, half amplitude 6ms, 3 directions 3 times each
|
Standard Compliancy
|
TBD
|
RoHS
|
RoHS Compliant
|