The STC-MCS231U3V features the 2.35 MP Sony Pregius IMX249 sensor sensor and 41.6 fps. Utilizing CMOS Global Shutter, the STC-MCS231U3V is capable of capturing moving objects without any motion blur.
Features:
Image Sensor | 1/1.2” 2.35 Megapixel Color (Sony: IMX249) |
Active Picture Element | 1920 (H) x 1200 (V) |
CCD Effective Picture Element | 5.86 (H) x 5.86 (V) μm |
Scanning System | Progressive |
Shutter Type | Global Shutter |
Scanning Mode | Full Scanning, Variable ROI (Horizontal and Vertical) |
Maximum Frame Rate (in Full Scanning, Free run Model) | 1920 x 1200 : 41.6 fps (8bit output), 41.6 fps (10bit output), 32.4 fps (12bit output) *Frame rate will drop if connected to the USB 2.0 port |
Maximum Frame Rate (in ROI, Free run Mode) | 1280 x 1024 : 48.5fps(8bit/10bit output), 37.8fps(12bit output) 640 x 480 : 99.7fps(8bit/10bit output), 77.7fps(12bit output) |
Sync System | Internal |
Video Output Format | Mono8 / Mono10 / Mono12 (Default: Mono8) |
S/N Ratio (8bit) | Less than 3 digit (Gain 0 dB) |
Sensitivity *1 | 570 Lux (Typical) |
Electronic Shutter | Exposure Time: 33.12 usec to 81.3 sec (in full scanning mode, 8bit output) Exposure Time: 38.62 usec to 104.3 sec (in full scanning mode, 10bit / 12bit output) |
Gain | - |
- Analog | 0 to 24 dB |
- Digital | 0 to 6 dB |
Offset | - |
- Analog | RAW8bit: 0 to 31 digit, RAW12bit: 0 to 511 digit |
ROI *2 | ROI (Horizontal: 32 to 1920 pixels / Vertical: 32 to 1200 lines)(Default: 1920 x 1200) Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 16 Regions, 16 pixels in horizontal direction and 4 lines in vertical direction |
Binning Function *3 | N/A |
Decimation Funtion *4 | Individual x2 Horizontal, Vertical Decimation (Frame rate increases with the vertical decimation, but the frame rate does not increase with the horizontal decimation) |
ALC | AE, AGC (Default AE: OFF, AGC: OFF) |
White Balance | N/A |
Mirror Image | Horizontal / Vertical / Horizontal and Vertical (Default: OFF) |
Pixel Defect Correction | Up to 64 pixels (Default: ON) |
Operational Mode *5 | Free-run / Edge-preset Trigger / Pulse width trigger / Start/Stop trigger*6 |
User Setting Storage | Supported |
Interface | USB 3.0 Super Speed (USB 3.0 Micro B) |
Input / Output | Three GPIO, One Camera Hardware Reset |
Power *7 | - |
- Input Voltage | +5V (typ.) (Conform to USB Standard) |
- Consumption | Less than 3.0 W |
Dimensions | C Mount: 28 (W) x 28 (H) x 40 (D) mm *excluding the connectors |
Lens Mount | C Mount |
Optical Filter | No IR cut filter |
Optical Center Accuracy | Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg. |
Weight | Approx. 48g |
Interface Connector | USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent |
Operating Temperature | - |
- Minimum | Environmental Temperature: 0 deg. ºC |
- Maximum | Camera housing temperature (top plate) shall not exceed 60 deg. ºC *1 |
Storage Temperature | Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85% |
Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
Shock | Acceleration 38G, half amplitude 6 ms, XYZ 3 directions 3 times each |
Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
RoHS | RoHS Compliant |