The STC-MB32PCL camera features a full frame, 30fps, VGA output, partial scanning, triggering, and reset capabilities.
Features:
Applications:
Model No |
STC-MB32PCL |
Image Sensor |
1/2" Progressive Monochrome CCD (Sony: ICX414AL) |
Total Picture Element |
692 (H) x 504 (V) |
Active Picture Element |
VGA Class: 648 (H) x 494 (V) |
Chip Size |
7.48 (H) x 6.15 (V) mm |
Cell Size |
9.9 (H) x 9.9 (V) μm |
Scanning System |
Full scanning, Variable ROI |
Scanning Method |
Full scanning, Partial full scanning, 1/2partial scanning,1/4 partial scanning, Variable partial scanning, Binning 1/2 partial scanning, Binning 1/4 partial scanninG Binning variable partial scanning |
Vertical Frequency (Frame Rate) |
31.47 (30 fps) / 62.94 (60 fps) / 94.784 (90 fps) Hz |
Horizontal Frequency |
15.7343 (30 fps) / 31.4685 (60 fps) / 47.2028 (90 fps) kHz |
Pixel Frequency |
12.2727 (30 fps) / 24.5454 (60 fps) / 36.8181 (90 fps) MHz |
S/N Ratio |
Less than 10 Digit (gain 0 dB) |
Minimum Scene Illumination |
Less than 0.1 Lux at F1.2 |
Video Output |
8 / 10 / 12 bit Raw, RGB Data (Base Configuration) |
Tap |
1 Tap |
Shutter Speed |
OFF, 1/3 ~ 1/40,000 (30 fps); 1/7 ~ 1/80,000 (60 fps); 1/11 ~ 1/120,000 (90 fps), (Variable at every H and clock) |
ALC |
Support(AE,AGC), (Defalut: AE:OFF, AGC:OFF ) |
Gain |
Support(AE,AGC), (Defalut: AE:OFF, AGC:OFF ) |
Gamma |
1 / 0.45 (Default: 1) |
White Balance |
N/A |
Pixel Defect Correction |
Up to 64 pixels (Default: ON) |
Power |
- |
- DC12V +/- 10% |
DC12V +/- 10% |
- Consumption |
Less than 1.8 W |
Operational Mode |
Edge Preset Trigger (V-reset, Non-Reset) Pulse Width Trigger (V-reset, Non-Reset) |
Communication |
RS232 via 12 Pin Connector |
Field update Function |
Support |
Dimensions |
28 (W) x 28 (H) x 40 (D) mm (excluding the connector) |
Lens Mount |
C Mount |
Optical Filter |
|
Optical Center Accuracy |
Positional Accuracy in H and V Directions: +/- 0.31 mm, Rotational accuracy of H and V: +/- 2.1 deg. |
Material |
- |
- Case |
Aluminum alloy |
- Tripod |
Polycarbonate ABS |
Interface Connector |
HR 10A-7R-6PB (Hirose) or equivalent |
Tripod |
Tripod can be attached to 2 plates (4 screws on the bottom plate, 3 screws on the top plate) |
Weight |
Approximately 42 g |
Operating Temperature |
Environmental Temperature: 0 to +50 deg. C, Environmental Humidity: 0 to 85% |
Storage Temperature |
Environmental Temperature: -25 to +65 deg. C, Environmental Humidity: 0 to 90% |
Vibration |
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each |
Shock |
Acceleration 70G, half amplitude 6 ms, XYZ 3 directions 3 times each |
Standard Compliancy |
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class A) |
RoHS |
RoHS Compliant |