Applications:
Specifications |
STC-HD133SDI
|
STC-HD133SDI-CS
|
Image Sensor | 1/3" Interline SXVGA CCD: ICX445AQA | |
HD Active Picture Element | 1280 (H) x 720 (V) | |
Chip Size | 626 (H) x 5.01 (V) mm | |
Cell Size | 3.75 (H) x 3.75 (V) µm | |
Minimum Scene Illumination | 5 Lux at F1.2 at 50% IRE, AGC ON and 1/60 seconds shutter speed with IR cut filter | |
Resolution | 600 TV Lines | |
Sync System | Internal | |
Video Output | HD-SDI (SMPTE292M); YPbPr, 1280 (H) x 720 (V), 60Hz / 59.94Hz / 50Hz | |
ALC | Can be configured via UART communication with auto electronic shutter and AGC | |
Shutter Speed | Adjustable shutter speed via the UART communication Upt to 1/100,000 seconds at 60Hz / 59.94Hz or up to 1/83,947 seconds at 50Hz | |
Gain | AGC or Fixed gain selectable via the UART communication; Gain range: 0 to 18.3 dB | |
Digital Gain | Up to 5.9866 dB | |
Gamma | 1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma; Gamma selectable via the UART communication | |
White Balance | Auto white balance / manual white balance / push-to-set white balance; White balance selectable via the UART communication | |
Mirror Image | Normal Image and Horizontal Flip are selectable via UART communication | |
DSP Presets | 28 DSP presets; Selectable picture mode via the UART communication | |
Line Generator | Both horizontal and vertical with all available colors Thickness adjustable via the UART communication | |
Shadow Mask Generator | Horizontal and vertical w/ shading level adjustment via the UART communication | |
Communication | +3.3V UART communication via 3.5φ stereo jack | |
Character Generator | Built-in character generation function via the UART communication | |
Pixel Blemish Collection | Up to 64 pixel blemish static collection | |
Power | ||
- Input Voltage | +9Vdc to +15Vdc (Typically: 12Vdc) | |
- Consumption | < 3.0 W | |
Dimensions | 40 (W) x 40 (H) x 45.8 (D) mm | |
Optical Filter | Includes IR cut filter | |
Lens Mount | C mount | CS mount |
Interface Connector | ||
- Video Output | BNC connector | |
- Power Input | 12V power jack | |
- External Control | 3.5φ stereo jack with SW board | |
- Communication | 3.5φ stereo jack | |
Button | Primary SW Initial press button function: push-to-set white balance Initial hold button function: Auto white balance (Function is selectable via the UART communication) | |
Weight | Approximately 120 g | |
Temperature | ||
- Operational | 0 to 40 deg. C | |
- Storage | -30 to 65 deg. C | |
Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), Acceleration: 10G, 30min., XYZ each direction | |
Shock | Acceleration: 38G, half amplitude 6ms, 3 times, XYZ each direction | |
Standard Compliancy | EMS: EN61000-6-2, EMI: 55011 | |
RoHS | RoHS Compliant |