Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Omron STC-GE500A 5MP Monochrome GigE Camera
2448 pixels x 2058 pixels, 2/3" PS IT CCD, 15 fps, Gigabit Ethernet Camera. Available in Monochrome (Black & White)
SKU
STC-GE500A
The STC-GE500A is part of Sentech's Standard GigE camera line. It features a 2/3" monochrome QSXGA sensor, 15fps and communication over a 6 pin Hirose or Ethernet connector. The STC-GE500A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam™.
Features:
| Image Sensor | 2/3” Interline QSXGA monochrome progressive CCD: ICX625AL |
| Total Picture Element | 2536 (H) x 2068 (V) |
| Active Picture Element | QSXGA: 2448 (H) x 2058 (V) |
| Chip Size | 9.93 (H) x 8.70 (V) mm |
| Cell Size | 3.45 (H) x 3.45 (V) µm |
| Scanning System | Progressive |
| Vertical Frequency (Frame Rate) | 15 Hz at full resolution 0.48175 to 60.71422 Hz adjustable via the communication Max. frame rate depends on the AOI setting Max. frame rate of the camera(60.71422 Hz) is 128 vertical resolution AOI setting |
| Horizontal Frequency | 31.1284 kHz |
| Pixel Frequency | 81.8182 MHz |
| Noise Level | |
|
@ 8bit output
|
≤ 4 Digit (Gain 0 dB) |
|
@ 10bit output
|
≤ 15 Digit (Gain 0 dB) |
|
@ 12bit output
|
≤ 60 Digit (Gain 0 dB) |
| Minimum Scene Illumination | 0.10 Lux at F1.2, 15 Hz |
| Sync System | Internal |
| Video Output | Digital 8, 10 or 12 bit Raw Data |
| Interface | IEEE802.3 (1000BASE-T) |
| Protocol | GigE Vision® 1.2 and GenICam™ 2.0 compliant |
| Exposure Time | Preset continuous mode: 10 useconds to 16,777,216 useconds Preset trigger mode: 10 useconds to 16,777,216 useconds Pulse width mode: 10 useconds to Unlimited |
| ALC | Auto iris lens, electronic iris and AGC (ON / OFF) |
| Gain | 0 to 20.4 dB |
| Gamma | Gamma 1.0 (Factory default) or uploadable gamma table |
| AOI Function | Programmable AOI setting via the communication |
| Smear Reduction | Selectable ON / OFF via the communication |
| Color Interpolation | N/A |
| White Balance Function | N/A |
| Trigger Mode | Edge preset trigger, Pulse width trigger (unlimited long exposure) |
| Communication | UART Communication through Ethernet port |
| I/Os | One opto-isolated input and two LVTTL outputs |
| Auto IRIS lens control | DC IRIS control input with video level target, peak/average and zone weight settings via the communication |
| Power | |
|
Input Voltage
|
+10.8 to +26.4 Vdc |
|
Consumption
|
< 6.0 W |
| Dimensions | 35 (W) x 35 (H) x 50.6 (D) mm excluding connectors |
| Optical Filter | No filter |
| Optical Center Accuracy | Positional accuracy in H and V directions: +/- 0.3 mm Rotational accuracy of H and V: +/- 1.5 deg. |
| Material | Aluminum (AC) |
| Lens Mount | C mount |
| Connectors | RJ45 connector Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent DC IRIS lens connector: M1951 (EMUDEN) or equivalent |
| Camera Mount Screws | Two 1/4” Tripod screw holes: (One on each top and bottom plate), Twelve M4 screws holes: (Four on each top and bottom plate, two on each side plate) |
| Weight | Approximately 120g |
| Operating Temperature | |
|
Minimum
|
Environmental temperature -5 deg. C |
|
Maximum
|
TBD |
| Storage Temperature | Environmental temperature -30 ~ 65 deg. C |
| Vibration | 20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
| Shock | Acceleration 38G, half amplitude 6 ms, 3 directions 3 times each |
| Standard Compliancy | EMS: EN61000-6-2, EMI: EN55011 |
| RoHS | RoHS Compliant |