Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group
Pleora iPORT PT1000-CL External Frame Grabber
*Product is discontinued, Replacement Option: CL-GigE
High-performance GigE Vision Connectivity for Camera Link cameras.
Pleora’s iPORT™ PT1000-CL interface boards converts Camera Link® cameras to native GigE Vision® cameras. These external frame grabbers make it possible for Camera Link cameras to go the distance with Gigabit Ethernet (GigE) and can be combined with GigE Vision cameras in networked systems. The PT1000-CL converts video data from Camera Link to packets and transmits it over a GigE link with low and predictable latency. GigE supports cabling distances of up to 100 meters using standard CAT5e/6 cabling and with off-the-shelf Ethernet switches, distances can be unlimited. The PT1000-CL interacts seamlessly with Pleora's other products in networked or point-to-point digital video systems and complies with GigE Vision® and GenICam™ standards. Manufacturers and integrators can shorten design time and lower system costs by reusing expensive or application-specific Camera Link cameras in GigE Vision installations, with minimal software development.
Pleora’s PT1000-CL connects at the PC with a GigE plug, eliminating the need for a desktop PC with an available peripheral card slot. As a result, system designers can reduce system size, cost, and power consumption by using computing platforms with smaller form factors, such as laptops, embedded PCs, and single board computers. The PT1000-CL is bundled with Pleora’s eBUS™ SDK.
Features:
- Transmits video from Camera Link Base mode cameras over GigE with low, consistent latency
- Built-in PLC for advanced real-time synchronization and triggering
- Asynchronous serial communications connectivity over Camera Link, as well as an external connector
Applications:
- Machine Vision
- Factory Automation
- Robotic Inspection
|
iPORT™ External Frame Grabbers |
•Purpose-built hardware compatible with Camera Link® Base cameras |
| eBUS™ SDK |
•eBUS Universal Pro driver |
|
Gige Vision® |
•Fully-compatible firmware load •Guarantees delivery of all packets •Comprehensive data transfer diagnostics |
|
Accepts LVCMOS / LVTTL signals |
•Compatible with all Base-configuration Camera Link cameras |
| Integrated Acquisition Engine |
•Can acquire images from a wide variety of sources, with pixel depths up to 16 bits, color or B/W, and multi-tap at up to 66 MHz |
|
Free Running or Externally Triggered |
•Flexible acquisition modes |
| Power |
•Enclosed: Hirose 6-pin (HR10A-7R-6P) |
| Network | •RJ-45 |
| Video |
•Female MDR-26 for Camera Link |
|
I/O and Serial Control |
•Enclosed: Hirose 12-pin (HR10A-10R-12S) |
|
Inputs: |
•Allows synchronization of multiple cameras or system elements •Flexible triggering capabilities, including Boolean combinations and Camera Link control signals •Wide range of interface signaling options •Electrically isolated control interface •Built-in debouncers |
| 2 UART Serial Links 1 LVDS 1 LVCMOS/LVTTL |
•Serial control of camera and other devices via PC application over the GigE link |
| Delayer, Rescaler, General-Purpose Counter |
•Allows full synchronization to line scan cameras |
| Gigabit Ethernet-Based | •Low-cost, easy-to-use equipment •Compatible with 10/100/1000 Mb/s IP/Ethernet networks •Supports IEEE 802.3 (Ethernet), IP, IGMP v.2, UDP and ICMP (ping) •Long reach: 100 m point-to-point, further with Ethernet switches or fiber |
| Multicast Capability |
•Enables advanced distributed processing and control architectures |
| Size (L x W x H) |
•Enclosed: 93 mm X 98 mm X 37 mm |
| Operating Temperature |
•Enclosed: 0°C to 45°C |
| External Power Supply | •4.5V to 16V |
| Power Consumption |
•2.5 W |
| Certification |
•CE and FCC (enclosed unit only) |
|
ORDERING INFORMATION |
|
|
900-2010 |
•iPORT PT1000CL4-GEV Base Camera Link board set with 16MB SDRAM |
|
900-2012 |
•iPORT PT1000CL4-128MB-GEV Base Camera Link board set with 128MB SDRAM |
|
900-2011 |
•iPORT PT1000-CL External Frame Grabber Base Camera Link product in enclosure, with |
|
900-2013 |
•iPORT PT1000-CL External Frame Grabber Base Camera Link product in enclosure, |
| 900-2112 |
•iPORT PT1000-CL External Frame Grabber Base Camera Link product in enclosure, with |
| 900-2113 |
•iPORT PT1000CL4-128MB-80MHZ-GEV-E Base Camera Link board set in enclosure with |
| 900-2002 |
•iPORT PT1000-CL External Frame Grabber Evaluation Kit, which contains 900-2011, power supply, and a GigE NIC |
| 900-2005 |
•iPORT PT1000CL4-128MB-E-DEV Development kit, including 900-2013, power supply, Gigabit Ethernet desktop NIC, |