Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

AVP520 Series | HD Video Conference Camera Image #1

Aegis AVP520 Series HD Video Conference Camera

VZ-27HX | 27″ Hybrid Premium Full HD CCTV Monitor Image #1

VZ-27HX (VZ27HX) 27″ Hybrid Premium Full HD CCTV Monitor

Pixelink PL-D755MU-POL (PLD755MUPOL): Polarized CMOS Camera (Sony IMX250MZR)

The PL-D755MU-POL polarization machine vision camera, featuring the Sony IMX250MZR image sensor, offers broader visual detection and characterization capabilities of material properties and improved performance over conventional monochrome sensors.

SKU
PL-D755MU-POL Polarized Camera

By filtering unwanted reflections and reducing glare, imaging previously undetectable defects, such as scratches or stress on transparent, reflective or low contrast surfaces, is now possible.

Available Configurations:
PL-D755MU-POL / 5.0 MP Enclosed Monochrome
PL-D755MU-BL-POL / 5.0 MP Board Level Monochrome
PL-D755MU-T-POL / 5.0 MP Enclosed Monochrome with Trigger

 
Features:

  • 5.0 MP
  • Sony IMX250MZR
  • 2/3" Sensor Size
  •  

    Applications:

  • Parts Inspection
  • Strength/Stress Testing
  • Traffic Enforcement
  • Medical Imaging
  • PCB & Flat Panel Display Inspection
  • Scratch Inspection
  • Metrology
  • Biometrics
  • Sensor Sony IMX250MZR
    Type CMOS Global Shutter
    Resolution 5.01 MP (1224 x 1024)
    Pixel Pitch 3.45 μm x 3.45 μm
    Active Area 11.1 mm diagonal
    FPN < 0.03% of signal
    PRNU < 0.4% of signal
    Dynamic Range                                   70 dB
    Bit-Depth 12-bit
    Polar Data Formats Stokes Polar HSV
    Effective Resolution Free Running
    1224 x 1024 53 fps  Frame rates will vary based on a host system and configuration *Above calculations based on fixed frame rate mode
    Interface | Date rate USB 3.0 | Micro-B | 5Gbps
    Board Level Trigger Connector 8-pin Molex 1.25mm pitch
    Enclosed Trigger Connector Hirose round 8-pin
    Trigger Software and hardware
    Board Level Trigger Input 1 input, 3.3V (with an internal pull-up resistor)
    Enclosed Trigger Input 1 optically Isolated, 5-12V DC at 4-11 mA
    Board Level GPO/Strobe 2 outputs, 3.3V
    Enclosed GPO/Strobe 2 outputs, 3.3V and 1 optically isolated max 40V DC, max 15mA
    GPI 1 input, 3.3V (with an internal pull-up resistor
    Dimensions (mm) 55 x 38.5 x 30.29
    Weight (g) 35.8 (Board level without optics)
    Mounting C-Mount and S-Mount
    Voltage 5V DC (from USB connector)