Industrial Cameras, Industrial Imaging and Machine Vision - Wholesale Distributor - Aegis Electronic Group

 

Hitachi KP-FR31SCL | CamerLink Camera Image #1

Hitachi KP-FR31SCL

Hitachi KP-FR80SCL | Camer Link Image #1

Hitachi KP-FR80SCL

Hitachi KP-FR39SCL

Ultra Compact Cube Size - RAW Color Progressive Scan Mini-Camera Link Camera
SKU
Hitachi KP-FR39SCL

By adopting a Camera Link digital interface, higher speed video data transfer is possible. Furthermore, by adopting the small connector (SDR) of a Mini Camera Link standard, the size of the camera has been reduced.

The data before image processing of a camera is transmitted in a RAW data output. Therefore, image processing is required after acquisition. Moreover, software for exclusive use is required.

High resolution combined with high frame rates are possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications.

  • Ultra Compact Cube Size Camera
  • 1/3” Format Progressive Scan CCD
  • Primary RGB Color Filter
  • 659 x 494 Effective Pixels
  • Raw Color Output (unprocessed)
  • 500 TV lines of Resolution
  • 91 Frames / Second
  • CameraLink Output, Mini SCL Connector
  • SCL or PCL output
  • Selectable 8 or 10 bits / pixel
  • Frame-on-Demand Mode
  • RoHS Compliant
Imager: 1/3 inch Interline type Progressive Scan CCD
Pixels: 659 x 494
Cell Size: 7.4 x 7.4
Aspect Ratio: 4 : 3
Sensing Area: 4.88 x 3.66
Scanning system Progressive
Frame rate 91 frames/second (full pixel readout)
Scanning frequency

Horizontal: 46.875 kHz
Vertical: 91.73 Hz

Drive frequency

Horizontal: 36.0000 kHz

Sync system Internal
Lens mount C mount
Flange focal distance 17.526 mm
Video output Digital output (CameraLink)
Base configuration: 36.0000 MHz
(Note: maximum cable length is 10 m)
Output image size: 659 (H)×494 (V) (full pixel readout)
Resolution Horizontal: 500 TV line
Vertical: 490 TV lines
Sensitivity 400 lx, F2.8, 3200 K
Minimum illumination 8.6 lx, F1.4, MAX GAIN
Signal noise to ratio 50 dB
Electronic shutter speed OFF, 1/91, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 second
OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second)
Gamma compensation γ= 1
Frame on demand

(A) Fixed shutter mode (8 steps or variable)
(B) ONE trigger mode
(C) Reset control mode
(D) VD reset mode

Trigger Input - CameraLink (CC1) *When Reset control mode CC1 and CC2 are used

Partial scan Selectable start position and width of picture grabbing in 1H step.
Power supply voltage 12 ±1 VDC
Current consumption Approx. 150mA (Approx. 1.8 W)
Ambient temperature
Performance 0 to +40 °C (+32 to +104 °F), less than 90 % RH (without dew condensation)
Operation 10 to +50 °C (+14 to 122 °F), less than 90 % RH (without dew condensation)
Storage -20 to +60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation)
Vibration endurance 98 m/s² (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
Shock endurance 686 m/s² (Drop test, once each top, bottom, left and right)
External dimensions 29 (W)×29 (W)×29 (D) mm (Not including protrusions)
Mass Approx. 50 g