Aegis SDI-EV-AS for Sony FCB-EV Series of HD Block Cameras

The SDI-EV-AS is a complete interface solution to provide real-time HD-SDI video from the Sony EV series of block cameras.This interface module provides a cost-effective solution to take full advantage of the high definition digital video provided by the FCB-EV block cameras. The interface board connects directly to the camera’s digital output to provide superior image quality. This interface module supports all the HD-SDI modes of the camera. (For 3G-SDI support, please contact us for latest product portfolio.) 

A DIP switch located on the rear of the module allows the HD video mode to be conveniently selected without the need to send serial commands to the camera. The SDI-EV-AS has a built in test pattern which conforms to the SMPTE RP-219-2002 specification (see Figure 2). The pattern generation feature is controlled via connector J3. The product is supplied as a kit consisting of the interface module, mounting kit and cables, and for volume OEMs the board alone may also be ordered without the mounting kit and cables if required. The physical outline of the SDI-EV-AS sits within the rear profile of the FCB-EV series of cameras and the supplied mounting kit allows the module to be securely and neatly attached to the camera (see Figure 1).

Features:

• HD-SDI interface solution for the Sony FCB-EV series of cameras 
• Includes interface module, cables and mounting kit
• Uses the camera’s digital output to give optimum image quality
• Supports the following HD modes – 1080p at 25, 29.97 and 30Hz, 1080i at 50, 59.94 and 60Hz, 720p at 25, 29.97, 30, 50, 59.94 and 60Hz 
• Compliant with SMPTE 274M and SMPTE 296M
• Video mode selection switches and built-in test pattern 
• RS-232 communications port for camera control 
• RoHS compliant